Miele S 7280 Jazz Operating manual - Page 31

method you can try., Open the service flap on the bottom

Get Miele S 7280 Jazz PDF manuals and user guides View all Miele S 7280 Jazz manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

If there are large particles or other blockages at the base of the suction hose, you can open it up to clear the passage. ^ Click the vacuum cleaner into the full upright position. ^ Press the release button on the telescopic wand and remove the handle from the suction hose ^ Guide the swivel elbow at the end of the suction hose over the catch hooks, to increase the stability the vacuum cleaner. A Undo the suction hose in the direction of the arrow. B Pull the suction hose connector off the swivel elbow. ^ Remove all blockages ^ Put the connector back on and click it shut. If you still have not been able to remove the obstruction(s), there is another method you can try. Open the service flap on the bottom rear of the vacuum cleaner. A Use a coin to undo the two screws until they stop. B Pry the service flap free. ^ Remove all blockages. Put the service flap back on and screw into place. Maintenance and care 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
If there are large particles or other
blockages at the base of the suction
hose, you can open it up to clear the
passage.
^
Click the vacuum cleaner into the full
upright position.
^
Press the release button on the
telescopic wand and remove the
handle from the suction hose
^
Guide the swivel elbow at the end of
the suction hose over the catch
hooks, to increase the stability the
vacuum cleaner.
A
Undo the suction hose in the
direction of the arrow.
B
Pull the suction hose connector off
the swivel elbow.
^
Remove all blockages
^
Put the connector back on and click
it shut.
If you still have not been able to remove
the obstruction(s), there is another
method you can try.
Open the service flap on the bottom
rear of the vacuum cleaner.
A
Use a coin to undo the two screws
until they stop.
B
Pry the service flap free.
^
Remove all blockages.
Put the service flap back on and screw
into place.
Maintenance and care
31