Miele Triflex HX1 Facelift Operating instructions/Installation instructions - Page 181
To activate the battery, it must be placed in
View all Miele Triflex HX1 Facelift manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
en-US Frequently Asked Questions With the help of the following guide minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This guide may help you to find the reason for the fault, and how to correct it. Risk of injury caused by rotating roller brush. You can injure yourself on the rotating roller brush. Switch the vacuum cleaner off before dealing with any problems. Use the On/ Off switch on the Comfort handle to do this. Problem Possible cause and solution The vacuum cleaner There is no battery inserted or the battery is inserted does not start when it is incorrectly. switched on. Insert the battery or check how the battery is posi- tioned (see "Installation and connection" - "Insert- ing the battery"). The rechargeable battery is not sufficiently charged. Charge the battery exactly as described in these operating instructions (see "Installation and connection" - "General battery information" and "Charging the battery"). An original Miele battery has not been inserted. Insert an original Miele AP01/AP02/AP03 lithiumion rechargeable battery (HX LA). The battery was not placed in the PowerUnit when charging it for the first time. To activate the battery, it must be placed in the PowerUnit the first time it is charged (see "Installation and connection" - "General battery information" and "Charging the battery"). The charger is still plugged in. Pull the plug out of the charging socket on the bottom of the battery. The operating noise is changing during vacuuming. The Electrobrush power rating is automatically set to the optimum level based on the type of flooring. The noise is not unusual - the vacuum cleaner is functioning normally. 181