Motorola 5440SM User Manual - Page 21
Important
View all Motorola 5440SM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Canopy 400 Series OFDM AP and SM User Guide IMPORTANT! Operators under regulatory requirements for DFS must ensure the new Canopy parameter "Region Code" is set correctly. This applies to initial configuration, after a module is reset to factory defaults, or after a module is upgraded. An AP will not transmit if the Region Code is configured to "None". IMPORTANT! On APs received from the factory, with Region Code set to "None", the operator must set the Region Code before the module will transmit. The same is true of APs which have been reset to factory defaults. Figure 5: Region Code on AP "Configuration => General" page Version 1, April 2008 Page 21 of 40
Canopy 400 Series OFDM AP and SM
User Guide
Version 1, April 2008
Page 21 of 40
IMPORTANT!
Operators under regulatory requirements for DFS must ensure the new
Canopy parameter “Region Code” is set correctly. This applies to initial
configuration, after a module is reset to factory defaults, or after a
module is upgraded.
An AP will not transmit if the Region Code is configured to “None”.
IMPORTANT!
On APs received from the factory, with Region Code set to “None”, the
operator must set the Region Code before the module will transmit. The
same is true of APs which have been reset to factory defaults.
Figure 5: Region Code on AP “Configuration => General” page