Motorola 68471 Product Guide - Page 3

Features Features Standard Feature Set The Motorola Vanguard 100 base unit includes the following standard feature set: • X.25 Service • Frame Relay Service • Asynchronous Protocol • Transparent Polled Asynchronous Protocol • Simple Network Management P rotocol • Trivial File Transfer Protocol Software Bundles Vanguard 100 offers multiprotocol access, that runs a variety of protocols depending on which software bundle you choose. Information about the available software bundles appears in the software release notice for the currently shipping software release. DSU Functionality The DSU daughtercard provides a 56 kbps point-to-point DDS1 interface that conforms to the AT&T 62310 or ANSI T1E1.4/91-006 standards. The DSU is FCC Part 68-registered. Diagnostic loopbacks from the telephone company are supported. You activate local diagnostics from the Control Terminal Port (CTP). CTP Manageability You can manage the Motorola Vanguard 100 from the CTP for configuration, reporting, and troubleshooting. Vanguard 100 is available in two and three serial port versions. Ports have the following characteristics. Port Characteristics Port Connector 1 V.24: DB25 DSU: RJ48S 2 DB25 3 V.24: DB25 Interface Default Speed DTE/ DCE DIM Site D/C Frame Relay 115.2 kbps (async) DCE 80 kbps (sync) DSU D/C Frame 56 kbps (sync) NA Relay DIM on Frame motherboard Relay V.24: • 80 kbps (sync) • 115.2 kbps (async) Selectable V.35, V.11, or V.36: • 384 kbps int. clocks • 1.54 Mbps ext. clocks Motherboard Async 115.2 kbps (async) DCE 80 kbps (sync) About the Vanguard 100 1-3