Motorola H-700 Setup Guide - Page 5

MAKING CALLS Function Make a voice dial call End a call Answer a call Ignore a call Redial last call Action Tap the Call button and speak the name after the tone Tap the Call button Open headset boom or tap the Call button (if boom is already open) Press and hold the Call button until you hear a beep Press and hold the Call button until you hear a beep Note: Your H700 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information. INDICATOR LIGHTS With the Charger Plugged In Indicator Light Headset Status Red (steady) Charging (less than 80% charged) Yellow (steady) Charging (more than 80% charged) Green (steady) Charging complete With No Charger Plugged In Indicator Light Headset Status Off Power off Purple (steady) Pairing mode/ Volume button orientation Red Battery low Blue (10 rapid flashes) Pairing successful Blue (slow pulse) Connected (on a call) Blue (quick flash) Standby (not on a call) Note: After 5 minutes of inactivity, the light stops flashing to conserve power, but the headset remains in standby mode. MAKING CALLS CONTINUED Function Action Answer a second incoming call Press and hold the Call button (places first call on hold) Toggle between two active calls Press and hold the Call button Join a 3-way call Press and hold both Volume buttons Put an active call on hold or resume a call on hold Press and hold the Call button until you hear a beep Transfer a call from the Open headset boom phone to the headset Disable the indicator light Press and hold both Volume buttons for 3 to 4 seconds Mute or unmute a call Tap both Volume buttons Note: Some features are phone/network dependent. AUDIO TONES The audio tones provide information about your headset status. Audio Tone Single high tone when pressing Volume button Five rapid high tones repeated every 60 sec. No audio indications; deteriorating quality Ring tone Single high tone Single low tone Dual high/low tone Single high tone Low to high tone Two ascending tones Two descending tones Headset Status Volume at minimum or maximum Low battery Out of range Incoming call Pairing confirmation Voice activation Voice tag not recognized End call Phone network not available Mute enabled Mute disabled