Motorola H500 User Manual - Page 1

Start Here > > > H500 Bluetooth® Handsfree Headset Get Connected in 4 Quick Steps 1 - CHARGE 2 - START BLUETOOTH FEATURE 3 - PAIR 4 - TEST AND USE BEFORE YOU BEGIN Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions. Take a moment before you get started to familiarize yourself with your new H500 Handsfree Headset. Earhook Volume Buttons Call Button Blue Indicator Light Microphone 1 CHARGE Your Headset's Battery Charge your headset's battery for 2 hours: 1 Plug the Motorola charger into the end of the headset. The blue indicator light turns on when the battery is charging. It may take up to 1 minute for the light to turn on. When the headset's battery is fully charged (about 2 hours), the blue indicator light turns off. 2 Unplug the charger from the headset. Note: Headset is not functional while charging. 2 START BLUETOOTH Feature On Your Phone Your phone's Bluetooth feature is off by default. To use your headset, turn on the Bluetooth feature in your phone. For most Motorola phones: 1 Select M((Menu) > Settings > Connection > Bluetooth Link > Setup. 2 Scroll to Power. 3 Press Change. 4 Scroll to On. 5 Press Select to turn on the Bluetooth feature. Bluetooth feature remains on until you turn it off. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 USA www.hellomoto.com 1-877-MOTOBLU 1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States for hearing impaired) 1-800-461-4575 (Canada) Guide Number: 6809494A56-A If you need more help, contact us at 1-877-MOTOBLU. MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. © Motorola, Inc. 2005. 3 PAIR Your Headset Step A - PUT HEADSET IN PAIRING MODE Before you can use your headset, you must pair (link) it with your phone. Call Button Blue Indicator Light 1 With the headset power off, press and hold the Call button for 6 to 10 seconds until the blue indicator light turns on and remains steadily lit. (The light will flash while you hold the Call button.) 2 If the indicator light is flashing or does not remain steadily lit, turn off the headset and repeat step 1. Note: To turn off headset, see "Turning On and Off" on the reverse side of this guide. PAIR Your Phone 4 TEST AND USE Step B - SET THE PHONE TO LOOK FOR YOUR HEADSET For most Motorola phones: 1 Select M((Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. The phone lists all Bluetooth devices it finds. 2 Select Motorola H500. 3 Press OK or Yes to pair (link) the handsfree device. 4 Enter the passkey 0000 and press OK. Note: Passkey cannot be changed from 0000. When your headset is successfully paired with your phone, the blue indicator light changes from steadily lit to flashing. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. Your phone and headset are now paired and ready to make and receive calls. To confirm they are operating properly, make a call: 1 Place the headset over your ear. See "Wearing the Headset" on the reverse side of this guide. 2 On your phone, dial the number you want to call and press the Send key. 3 If your phone and headset are successfully paired, you will hear ringing on the headset. After you have successfully paired your phone and headset, you do not need to repeat these initial setup steps each time you use the headset. TROUBLESHOOTING My phone does not find my headset. Make sure the blue light on your headset is steadily lit when your phone is searching for devices (see step 3). My headset worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature has been turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2). If you have confirmed the Bluetooth feature is on in your phone, pair your phone and headset again (see step 3). Support. If you need more help, contact us at 1-877-MOTOBLU or visit us at www.hellomoto.com/bluetooth and click Support USING YOUR H500 See Features and Functions Guide on the reverse side of this guide for information on using your H500.