Motorola H620 User Manual - Page 6

MAKING CALLS Function Action Receive a call Tap the Call button Mute or unmute a call Tap both Volume buttons Reject a call Press and hold a Volume button until the ringer stops End a call Tap the Call button Redial last call Press and hold the Call button until you hear two tones Make a voice dial call Tap the Call button and wait for voice prompt Answer second incoming Use phone to answer call (follow your phone's instructions) Note: Your H620 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information. Note: Some features are phone/network dependent. INDICATOR LIGHT With No Charger Plugged In Headset Indicator Headset Status Off Power off Three blue flashes Powering on/off Steady blue Pairing/connect mode Rapid blue/purple flashes Connection successful Quick blue flash Incoming/outgoing call Slow blue pulse Connected (on a call) Slow blue flash Standby (not on a call) Slow red flash Idle (not connected to phone) Slow purple pulse Connected call muted Steady red Attempting to connect Quick red flash Low battery Note: After 20 minutes on a call or of inactivity, the light stops flashing to conserve power, but the headset remains on. INDICATOR LIGHT With the Charger Plugged In Headset Indicator Headset Status Red Charging (battery level less than 50% charge) Yellow Charging (battery level more than 50% charge) Green Charging complete AUDIO TONES Audio Tone Headset Status Ascending tone Powering on Two descending tones Powering off Ring tone Incoming call Two short tones when Volume at minimum pressing Volume button or maximum High/low tones Low battery repeated every 60 sec. No audio indications; deteriorating quality Out of range Two ascending tones Connected to phone Two rapid ascending tones Mute enabled Two rapid descending tones Mute disabled Low tone every 10 seconds Mute reminder