Motorola L601 User Guide - Page 21

Resetting all settings, Paging/Finding a handset

Page 21 highlights

3.19 Resetting all settings 1. Press MENU and then VOL+ or REDIAL/VOL- to select RESET SETTINGS. 2. Press MENU and then VOL+ or REDIAL/VOL- to select ALL SETTINGS. 3. Press MENU to select YES. All personalized settings will be reset to default. NOTE All of your phonebook entries, calls list, and redial list, will remained unchanged. 3.20 Paging/Finding a handset Press FIND on the base. All handsets registered to the base will ring. To stop the paging, press FIND again, or press any key on the handset, or place the handset on the base. 4. Help The icon is not scrolling when the handset is placed on the base • Handset not properly seated on the base cradle -readjust the handset on the base. • Dirty contact - clean the charge contacts by wiping with an alcohol moistened cloth. • Battery is full - charging is not necessary at this time. No dial tone • If there is no base power, check the connections. Reset the phone by unplugging then plugging it back into an electrical outlet. • If the handset batteries are empty, recharge the battery pack for at least 24 hours. • Move the handset closer to the base. • Be sure to use only the provided telephone cords. Poor audio quality • If the base is too close to electrical appliances, reinforced concrete walls, or metal door frames, move the base from these areas. Help 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33

Help
21
3.19
Resetting all settings
1.
Press
MENU
and then
VOL+
or
REDIAL/VOL-
to select
RESET SETTINGS
.
2.
Press
MENU
and then
VOL+
or
REDIAL/VOL-
to select
ALL SETTINGS
.
3.
Press
MENU
to select
YES
. All personalized settings will
be reset to default.
NOTE
All of your phonebook entries, calls list, and redial list, will
remained unchanged.
3.20
Paging/Finding a handset
Press
FIND
on the base. All handsets registered to the base
will ring.
To stop the paging, press
FIND
again, or press any key on
the handset, or place the handset on the base.
4. Help
The
icon is not scrolling when the handset is
placed on the base
°
Handset not properly seated on the base cradle -readjust
the handset on the base.
°
Dirty contact - clean the charge contacts by wiping with
an alcohol moistened cloth.
°
Battery is full - charging is not necessary at this time.
No dial tone
°
If there is no base power, check the connections. Reset
the phone by unplugging then plugging it back into an
electrical outlet.
°
If the handset batteries are empty, recharge the battery
pack for at least 24 hours.
°
Move the handset closer to the base.
°
Be sure to use only the provided telephone cords.
Poor audio quality
°
If the base is too close to electrical appliances, reinforced
concrete walls, or metal door frames, move the base
from these areas.