Motorola L802 User Guide - Page 21

3.17 Setting the area code 1. Press MENU and then VOL+ or REDIAL/VOL- to select SETUP BS. 2. Press MENU and then VOL+ or REDIAL/VOL- to select AREA CODE. 3. Press MENU and then enter the area code. 4. Press MENU to save. 3.18 Registration Up to 5 handsets can be registered to one base. The original handset is pre-registered to use. Additional handsets must be registered to the base before you can use them. To register an additional handset, 1. Press MENU and then VOL+ or REDIAL/VOL- to select SETUP HS. 2. Press MENU and then VOL+ or REDIAL/VOL- to select REGISTRATION. 3. Press MENU and then VOL+ or REDIAL/VOL- to select YES or NO. Using the Phone 4. Select YES then press MENU to enter the registration procedure as follows: 1. Press and hold FIND for around 4 seconds on the base, release once IN USE LED is flashing. 2. Place the unregistered cordless handset on the base or charger. 3. A confirmation tone is generated if registration is successful. HANDSET X is displayed where X denotes the number of handsets, and then the phone returns to idle. To register an originally unregistered handset, follow steps 1 through 3 above. 3.19 Resetting all settings 1. Press MENU and then VOL+ or REDIAL/VOL- to select RESET SETTINGS. 2. Press MENU and then VOL+ or REDIAL/VOL- to select ALL SETTINGS. 3. Press MENU and to select YES. All personalized settings will reset to default. NOTE All of your phonebook entries, calls list, and redial list, will remained unchanged. 21