Motorola LS2208-SR20001R User Manual - Page 172
User-Programmable Supplementals, UPC/EAN/JAN Supplemental Redundancy
View all Motorola LS2208-SR20001R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
12 - 12 Symbol LS2208 Product Reference Guide User-Programmable Supplementals If you selected a Supplemental User-Programmable option from Decode UPC/EAN/JAN Supplementals on page 12-9, select User-Programmable Supplemental 1 to set the 3-digit prefix. Then select the 3 digits using the numeric bar codes beginning on page D-1. Select User-Programmable Supplemental 2 to set a second 3-digit prefix. Then select the 3 digits using the numeric bar codes beginning on page D-1. Supplemental User-Programmable 1 Supplemental User-Programmable 2 UPC/EAN/JAN Supplemental Redundancy If you selected Autodiscriminate UPC/EAN/JAN Supplementals or one of the supplemental modes, this option adjusts the number of times to decode a symbol without supplementals before transmission. The range is from two to thirty times. Five or above is recommended when decoding a mix of UPC/EAN symbols with and without supplementals. The default is 7. Scan the bar code below to set a decode redundancy value. Next, scan two numeric bar codes beginning on page D-1 in Appendix D, Numeric Bar Codes. Include a leading zero for single digit numbers. To correct an error or change a selection, scan Cancel on page D-3. UPC/EAN/JAN Supplemental Redundancy