Motorola MOTOKRZR K1m Verizon User Guide - Page 14
connect a cable, from your phone's mini-USB port to a high - driver
View all Motorola MOTOKRZR K1m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
2 Plug the other end of the charger into the appropriate electrical outlet. The battery indicator N flashes while your phone is charging. 3 When your phone is turned on with the charger attached, the charge complete message will flash on the display for two seconds and then the battery meter symbol will stop flashing when your phone is fully charged. If your phone is turned off with the charger attached, the charge complete message will stay on the display when your phone is fully charged. Remove the charger. Tip: You can safely leave the charger connected to the phone after charging is complete. This will not damage the battery. When you charge the battery, the battery level indicator in the upper right corner of the display shows charging progress. At least one segment of the battery level indicator must be visible to ensure full phone functionality while charging. To charge from your PC, connect a cable from your phone's mini-USB port to a highpower USB port on a computer (not a lowpower one such as the USB port on your keyboard or bus-powered USB hub). Typically, USB high-power ports are located directly on your computer. Both your phone and the computer must be turned on, and your computer must have the correct software drivers installed. Cables and software drivers are available in Motorola Original data kits, sold separately. 12 essentials