Motorola MU24CVST Owners Manual - Page 9

To Charge Battery With Charger Adapter To Charge Battery With 10 Hour Desktop Charger 1. Turn the radio off. 2. Lift accessory cover and plug the Charger Adapter firmly into the small jack (lower hole). Fig. G Note: The Desktop Charger is optional and may not be included in your package. 1. Connect Desktop Charger and Charger Adapter. Fig. H 3. Plug the charger into an electric outlet. The 2. Charge the battery while inside the radio by light on the charger will glow continuously placing the radio in the Desktop Charger if charging properly. with radio facing towards you. 4. Allow 10 hours for the battery to fully charge. Notes: • For optimum battery life, the battery should not be left charging for prolonged periods after reaching full charge. Charging the battery over the weekend is acceptable. • Do not transmit while radio is charging. Transmitting while radio is charging can cause the radio transmitter or the charger to operate improperly. You can also charge the battery by removing battery from radio and placing it in Desktop Charger. Silver contacts must face down and arrow points toward front of charger. Fig. H 3. The light on top of the Desktop Charger will glow continuously when radio / battery is inserted. If light does not come on, check radio / battery is properly inserted and check battery/ charger contacts to be sure they are clean. The light will continue to glow until the radio / battery is removed from Desktop Charger. • Turn radio off when charging. If radio is 4. Allow 10 hours for the battery to fully on while charging, at least twice as much charge. time is required to charge the battery. FIG. G FIG. H 7