Motorola R910 Quick Start Guide - Page 1
Motorola R910 Manual
View all Motorola R910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
R910 Ethernet Router Connect The Router First. Locate all items in your box that you need for the installation. You'll also need a computer on Ethernet. Netopia Router Power Adapter 2 twisted pair cables For DSL connection and 10/100 BaseT Ethernet. Console cable You may need this later, but not now. Netopia CD Software & reference manuals. Computer on Ethernet Windows PC or Macintosh on Ethernet with TCP/IP installed. Next. Connect the Router. 1 Ethernet Connect the Ethernet cable. Connect one twisted-pair cable between the switch on the router and the Ethernet port on your computer. 2 WAN Line Connect the Line port to the wall jack or to your Internet connection device. Connect one twisted-pair cable or cross-over cable between the Line 1 port on the router and the Ethernet port on your DSL or cable modem. Connect the DSL or cable modem to the wall jack, according to the manufacturer's instructions. Do NOT connect the router's Ethernet WAN port to an ordinary telephone line. 3 Power Connect the Power adapter. Connect the mini-DIN8 connector of the power adapter to the power port. Plug the other end into an electrical outlet. Modem WAN Ethernet Ethernet 4 3 2 1 Console Line 1 Power Configure The Router Launch your Telnet application Follow the instruction on the next page to run Telnet and complete your Netopia Router's Easy Setup procedure. OVER