Motorola V325i User Guide - Page 11

4 Lower the battery cover onto the phone, then slide it forward until it clicks into place. Charging the Battery New batteries are shipped partially charged. Before you can use your phone, you need to install and charge the battery as described below. Some batteries perform best after several full charge/discharge cycles. 1 Plug the charger into your phone, with the wider end at the bottom. 2 Plug the other end of the charger into the appropriate electrical outlet. 3 When your phone indicates Charge Complete, remove the charger. Note: When you charge the phone with the flip open, the phone's screen may be dark. Briefly press the P key to turn the main display back on. Tip: You can safely leave the charger connected to the phone after charging is complete. This will not damage the battery. Note: When you charge the battery, the battery level indicator in the upper right corner of the display shows how much of the charging process is complete. At least one segment of the battery level indicator must be visible to ensure full phone functionality while charging. Getting Started 9