Home » Motorola Manuals » Bridges & Routers » Motorola mb7621 » Manual Viewer

Motorola mb7621 User Guide - Page 4

ON/OFF button, POWER

Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

ON/OFF button POWER Connect the supplied power cube between the power jack and an electrical outlet. COAX Connect a "live" coax cable to the modem's COAX connector as discussed above. (Tighten the nut so it's finger tight. You may want to use the supplied wrench. Make the connection snug but not over-tight.) RESET button ETHERNET (LAN) Connect this port to a computer. Alternatively, you can connect to a WiFi router see If You Want to Connect a Router, below. 4

Section	Page
24x8 Cable Modem	1
Model MB7621	1
Most users will connect a WiFi router to the MB7621. A wireless router lets multiple devices (computers, smartphones, tablets, video devices, game stations…) share your cable modem’s Internet connection, either wirelessly or through a direct Ethernet ...	7
1. The cable modem and the router should both be powered off.	7
2. Plug one end of the cable modem’s Ethernet cable into the Ethernet jack of your modem, and plug the other end of the cable into the router’s WAN port. (You may need to disconnect the cable from your computer first.)	7
3. Power-up the cable modem. Wait for the ONLINE light (/) to be solidly lit.	7
4. Power-up the router. Wait for the router to complete its power-up sequence.	7
5. The LAN light / on your modem should be lit to show the Ethernet connection to your router.	7
6. Follow your router’s instructions for setting up the router and connected devices.	7
If you haven’t already activated your Internet service, do that now. (See Prepare to Activate on page 5.) Using a computer or other device connected to the router, try connecting to the Internet. If it works, Congratulations! Installation is complete.	7
Troubleshooting Tips	9