Mr. Coffee BVMC-IMX41 User Manual - Page 7
B. Water Filtration System
![]() |
View all Mr. Coffee BVMC-IMX41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
B. Water Filtration System Congratulations! You are the owner Red of a MR. COFFEE® water filtration Indicator system. This carbon-based water filter improves the taste of your coffee by removing up to 97% of the chlorine from the water you may use to brew your coffee. First, look for the MR. COFFEE® Filtration Friendly symbol on the bottom of your filter basket. If you do not see this symbol, please call 888-800-9130. To use the water filtration system in your MR. COFFEE® Coffeemaker, please follow these steps: 1. Align the red indicator on the frame to the letter that corresponds with the month that you are using the disk for the first time. This serves to remind you to change the disk every month (approx. 30 brewing cycles). 2. Rinse the water filter in fresh water before first use. NOTE: For optimum results, use the water filtration system with a permanent filter. 3. Follow "Adding Water and Coffee" Instructions 4. When you are done brewing your coffee, rinse the water filter with fresh water. Do not put your water filter in the dishwasher. Frame Filter Disk 12 BVMC-IMX Series_16ESM1.indd 13-14 C. Adding Water and Ground Coffee: 1. Open the brew basket lid. For your convenience, you can lift out the removable filter basket. 2. Place a MR. COFFEE® brand 10- 12 cup paper basket-style filter or a MR. COFFEE® permanent filter into the removable filter basket. (Figure 4) NOTE: If using paper filters, it is important that the sides of the filter fit flush against the side of the filter basket. If filter collapse occurs, dampen the filter before placing in the filter basket and adding ground coffee and water. 3. Add the desired amount of coffee and gently shake to level the coffee. See the "Suggested Figure 4 Coffee Measurement Chart". 4. After following instructions in the Water Filtration System, place the MR. COFFEE® water filter in the basket, making sure that the side marked "this side up" faces you and that the water filter is level. 5. Be sure the filter basket is properly centered and all the way down in the brew basket and close the lid. 6. Fill the decanter with cold, fresh water to the desired capacity (1 cup equals 5 ounces). For easy and accurate filling, the water markings on the glass decanter and on the dual water windows show the amount of water needed to make the corresponding desired number of cups. Do not fill past the "12 cup MAX line" or water will flow out of the overfill hole in the back of the coffeemaker. The amount of coffee brewed will always be slightly less than the amount of water poured in the water reservoir. This is due to the minimum absorption of water by the coffee grounds. 13 4/27/16 3:12 PM
![](/manual_guide/products/mr-coffee-bvmcimx41-user-manual-7b93bbb/7.png)