Mr. Coffee ECMP50-RB User Manual - Page 11
The ready light
View all Mr. Coffee ECMP50-RB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
2. Make sure all controls are in the off position and the power cord is disconnected from the electrical outlet. (See Section "CAUTION" on Page 4). Fill the reservoir with white vinegar above the minimum level into reservoir. 3. Insert the brew basket (with filter) and place jar/carafe or regular cup on top of the drip tray and under the brew basket. 4. Plug the power cord into the electrical outlet. 5. Press the red button to switch the unit on "I". Once the ready light " " becomes solid green, press the brew button " " and then turn the side control knob counter-clockwise to the brew position " ". The vinegar will start flowing through the unit. Once all the vinegar has been drained from the reservoir turn the side knob clockwise to the off position " ". 6. To remove any remaning traces of vinegar from the internal parts, repeat steps 2-5 above, replacing the vinegar with water, as often necessary. 7. To clean the frothing tube internally, place a cup with cold water under the tip of the frothing tube. Wait until the ready light " " becomes solid green. Insert the frothing tube into the water, press the steam button " ". The ready light " " will start blinking and once it becomes solid green again turn the side knob clockwise to the steam position " ". Let the steam come out for about 10 seconds. This will clean any residue left in the frothing tube from frothing milk. 8. Turn the side knob counter-clockwise to the off position " " and press the red switch to the off position "O". 9. Repeat Steps 1 - 7 as necessary using only tap water to rinse any remaining traces of vinegar out of the machine. 10 BVMC-ECMP50_15ESM1.indd 10 10/12/14 9:56 AM