Mr. Coffee FTTX95-1 User Manual - Page 8
Brewing Coffee Later - model
View all Mr. Coffee FTTX95-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
15-008-707 FT.qxd:Layout 2 3/13/08 5:20 PM Page 14 4. Prior to making a second pot of coffee, turn the coffeemaker off. This will reset the FRESH BREW™ TIMER feature. To turn the coffeemaker off, press the SELECT button until all lights turn off. 5. Make sure the decanter is empty before starting to brew coffee. 6. Be sure to turn your coffeemaker off when no longer using it. The Fresh Brew™ Timer Feature The FRESH BREW TIMER feature displays the time since the coffee brewing cycle started. At the start of the brew cycle, the FRESH BREW TIMER feature will automatically be activated. Pressing the FRESH BREW TIMER button (Figure 8) will allow you to toggle between the time of day and FRESH BREW TIMER. While on the clock mode, the FRESH BREW TIMER feature will keep counting. NOTE: The BREW NOW green light must be on for the FRESH BREW TIMER feature to operate. The time and delay brew time cannot be set when the fresh brew time is displayed. FIGURE 8 BREWING COFFEE LATER 1. You must first set the time for when you would like the coffeemaker to begin brewing your coffee as described in Setting the Clock and the Delay Brew Timer section. 2. Prepare your coffeemaker as described in Adding Water and Ground Coffee section. 3. To activate DELAY BREW and program your coffeemaker to brew coffee at a later time, press the SELECT button twice (Figure 9). The yellow DELAY BREW light will turn on. The coffeemaker is now set to automatically brew coffee at the pre-set later time. At this time the brew strength light will turn on. You can select the strength that you desire by pressing the BREW STRENGTH button. 4. At the pre-set time, the green BREW NOW light will turn on and the DELAY BREW yellow light will turn off, indicating the brewing has started in the selected brew strength. The FRESH BREW™ TIMER feature will start. 5. The coffeemaker warmer plate will keep your coffee hot for 2 hours and then automatically turn off. Thermal models will turn off at the end of the brew cycle. As a safety feature, your coffeemaker will NOT start again automatically the next day. If you want your coffee to brew at the same time the following day, simply add a new filter, coffee and water and set DELAY BREW, by repeating Steps 2 and 3 above. To cancel DELAY BREW: Press the SELECT button until all lights turn off (Figure 9). FIGURE 9 14 15