NEC 1530V MultiSync LCD1530V User's Manual - Page 8

Quick Start -continued Tilt Grasp both sides of the monitor screen with your hands and adjust the tilt as desired (Figure TS.1). Remove Monitor Stand for Mounting Figure TS.1 To prepare the monitor for alternate mounting purposes: 1. Remove the connector cover, hinge cover and cable cover (Figure R.1). 2. Disconnect all cables. 3. Place monitor face down on a nonabrasive surface ( place the screen on a 32 mm platform so that hole of stand match to screw location). (Figure R.2). Push Push 4. Remove the 4 screws connecting the monitor to the stand and lift off the stand assembly (Figure R.2) the monitor is now ready for mounting in an alternate manner. Figure R.1 5. Connect the AC cord and signal cable to the back of the monitor. 6. Reverse this process to reattach stand. 32mm Figure R.2 Screws W 6 8 ϒϥοΫ 0.9.25, 5:13 PM