NEC 240K User Manual - Page 28
To connect SCART output RGB
UPC - 050927241666
View all NEC 240K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
INSTALLATION AND CONNECTIONS Ͼ Making Connections To connect SCART output (RGB) Before connections: An exclusive SCART adapter (ADP-SC1) and a commercially available SCART cable are required for this connection. NOTE: • Audio signal is not available for this connection. • The RGB IN 2 connector does not support SCART signal and Plug & Play. ON STAND BY PO SWTEALRTAUMSP ALIGNMENT AUTO ADJUST PC-CARD TER SELECT CANCE L SOURCE Video equipment such as DVD player Projector EN MEN U Commercially available SCART cable Female To RGB IN 1 ADP-SC1 1. Turn off the power to the projector and your video equipment. 2. Use the NEC ADP-SC1 SCART adapter and a commercially available SCART cable to connect the RGB 1 input of your projector and a SCART output (RGB) of your video equipment. 3. Turn on the power to the projector and your video equipment. 4. Use the RGB 1 button on the remote control to select the RGB 1 input. 5. Press the MENU button on the remote control to display the menu. 6. From the Advanced menu, select [Projector Options] → [Setup] → [Page 3] → [Signal Select RGB1] → [Scart]. SCART is a standard European audio-visual connector for TVs, VCRs and DVD players. It is also referred to as Euro-connector. NOTE: The ADP-SC1 SCART adapter is obtainable from your NEC dealer in Europe. Contact your NEC dealer in Europe for more information. E-28