NEC 4001-20B User Manual - Page 23
R/Cr, G/Y, B/Cb, Y, Cb/Pb, Cr/Pr
UPC - 897204001496
View all NEC 4001-20B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
ITEM LABEL 10. SC TRIGGER 11. S-VIDEO 12. POWER SWITCH 13. AC IN 14. L/MONO, R 15. VIDEO IN 16. COMPONENT IN (Y, Cb/Pb, Cr/Pr) COMPUTER 2 IN 17. (R/Cr, G/Y, B/Cb, H, V) 18. COMPUTER 1 IN 19. AUDIO IN (1) 20. LAN 21. SERVICE 1. Introduction DESCRIPTION SEE PAGE: When connected to the screen through a commercially available cable, the screen de- ploys automatically on start up of the 130 projector. The screen retracts when the pro- jector is powered off (see notes below) Connect a commercially available S-video cable from a video device 35 Turn on/off the projector 37, 47 Connect the supplied power cable 36 Connect RCA audio cables (not supplied) from the input device right and left channels. - This audio jack is shared with S-Video input. Connect a composite video cable (not sup- plied) from a video device to the yellow RCA 35 jack Connect a component video enabled device 34 Connect RGBHV or Component signal from computer or component video enabled device 31 Connect a VGA cable (not supplied) from a computer 31 Connect the audio cable (not supplied) from the input device - Connect a LAN cable (not supplied) from a computer 91 Connect the USB cable (not supplied) from a computer. For service personnel only. - Note: y To use this feature, you must turn on the Screen Trigger function on OSD. y Screen controllers are supplied and supported by screen manufacturers. y Do not use this jack for anything other than intended use. Connecting the wired remote control to the Trigger mini jack causes damage to the remote control. 11