NEC 42VR5 Brochure - Page 4

Enhanced Split Screen materializes appealing presentations*1 *1 Applied in PX-61XM3, PX-61XR3, PX-50XM4 and PX-50XR4 Two Digital AccuDevice systems deliver accurate, high quality images on both the main and sub screens The signal processing circuit, Digital AccuDevice, achieves Full Digital Sampling without thinning out the input signals and fully digitizes every process for processing image input signals. The new 61-inch PlasmaSyncR PX-61XM3 and the new 50-inch PlasmaSyncR PX- 50XM4 are equipped with two Digital AccuDevice. Clear, progressive high-definition images, in which signal deterioration and noise are suppressed, are displayed on both the main and sub screens by fully digitizing the original visual images without converting them into analogue signals. Furthermore, since the 61-inch wide monitor is one of the largest in the industry, images on the sub screen are easy to see. The advanced new PlasmaSync 61XM3 and 50XM4 feature high quality images and variegated functions and supports image evolutions •High quality images are available on both the main and sub screens by employing two Digital AccuDevice systems for presentations and video conferences, where detailed information must be displayed, and electronic advertising systems, where vivid visual images are required. Available in two screen modes- Picture-in-Picture and Side-by-Side Since input signals from any system can be displayed together, provide appealing visual expressions by combining images from two personal computers or the images from a PC and video signals. Two screen modes - Picture-in-Picture and Side-by-Side - are available and both have several display methods. Enhanced Split Screen has new functions for efficient use in business and educational presentations ; informational and advertising displays for transport facilities, financial institutions, and commercial facilities ; and remote videoconference systems. A full range of new functions for a variety of business needs •New Picture-in-Picture •New Side-by-Side 640 540 440 480 340 405 330 255 640 540 440 340 360 304 248 192 682 384 682 384 512 682 768 682 768 1024 340 576 768 192 225 1024 340 768 Normal Display Wide Display Main Screen Sub Screen (unit : pixel) Side-By-Side Function Side-By-Side Screen Mode for electronic advertisements and informational displays The side-by-side screen mode demonstrates its ability to deliver an appealing display of information by evolving two different images, such as " text + image ", on the screen at the same time. In the new 61-inch PlasmaSync PX-61XM3 and the new 50-inch PlasmaSync PX50XM4, this function is improved further, so that three aspect ratio patterns can be selected for optimum screen display with the simple operation of a cursor key on the remote control unit. In addition, one screen can display scrolling text while the other screen maintains a 4:3 display ratio when the monitor is installed vertically. Depending on the use or purpose, expand the variety of content expressions through combinations of images and text or time varying images and text data. Propose new applications as information displays in restaurants or hotels and advertisement displays in stores or showrooms. (*Please note that the vertical display needs to arrange the content vertically.) Fees schedule W eekday Adults $38 C hildren $28 Fees schedule W eekday Adults $38 Children $28 Fees schedule Weekday Adults $38 Children $28 You can choose one of three patterns for the horizontal aspect ratio. Digital Zoom Function enlarges both the main and sub screens up to 900% In the side-by-side screen mode, both screens can enlarge images up to 900% by 63 points in 64 steps. With two Digital AccuDevice systems, very high-definition quality can be maintained even when the image is enlarged. Information with extremely high visibility can be displayed. Comparison studies during presentations can be made by enlarging each screen and changing the position of the enlarged images with a cursor key. (*For the picture-in-picture screen mode, only the main screen can enlarge images.) 6 Ordinary image New PlasmaSync SUB PICTURE DETECT Function turns the sub screen on/off automatically This function automatically turns off the display of the sub screen if input signals for the sub screen are interrupted and restores it automatically when signals for the sub screen are input again. This is effective for the picture-in-picture screen mode. Since it is not necessary to turn both screens on/off, control of the two screens is simplified, so you can concentrate on the presentation or lecture. Picture-In-Picture Function ZOOM NAVIGATION Function indicates the area being enlarged Display an entire image on the sub screen, and display the enlargement on the main screen. The position enlarged in the main screen is indicated with a + symbol on the sub screen. This function is effective for enlarging an important point or a detailed drawing of a map or CAD data then confirming the entire image and the point being enlarged. (* This is available only for analogue RGB input. * This is available in the side-by-side screen mode as well.) An enlarged image is displayed on the main screen When input signals for the sub screen are interrupted, the display will shift to the single screen mode. When signals for the sub screen are input again, the sub screen is restored. PICTURE FREEZE Function displays a still image on the sub screen Store a page of data displayed on the main screen on the clipboard memory and display the page on the sub screen. When scrolling several images continuously during a presentation, this function effectively compares the two images displayed separately. (* This is available only for analogue RGB input. * This is available in the side-by-side screen mode as well.) An entire image is displayed on the sub screen Sub Screen Moving Function moves the sub screen to any one of four positions Although the sub screen can be moved into two display positions on an ordinary plasma monitor, it can be moved into any one of four positions on the new PlasmaSync 61XM3 and 50XM4. Important information on the main screen may be hidden by the sub screen on an ordinary monitor. Since the sub screen can be moved more flexibly on the new monitor, important information on the main screen is always displayed. 1st screen (previous image) 2nd screen (current image) SEAMLESS SWITCH Function instantly switches two input signals The sub screen moves to any one of four positions on the display. An ordinary plasma monitor needs time to switch screens due to input signal processing. Because two signal processing circuits are employed in the new PlasmaSync 61XM3 and 50XM4, the speed for switching input signals has been dramatically improved. For instance, the monitor instantly processes the insertion of a CM image, information from video signals, or a signboard displaying information from video signals or PC signals, as well as immediately switching between a stadium score display (PC signals) and a video camera image display (video signals) or a reciprocal display between data and relayed images in a monitoring system. (It is not possible to switch input signals among video inputs.) 7