NEC 60XP10 42PX10 50XP10 60XP10 user's manual - Page 19
English - pdp
UPC - 805736019452
View all NEC 60XP10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
English On-Screen Display (OSD) Main Menu SCREEN OPTION1 Sub Menu ASPECT MODE V-POSITION Sub Menu2 Sub Menu3 H-POSITION V-HEIGHT H-WIDTH AUTO PICTURE CLOCK PHASE CLOCK UNDER SCAN Available only when the Advanced OSD function is enabled. OSD DISPLAY OSD OSD POSITION OSD ORBITER BNC INPUT OSD TRANSP. D-SUB INPUT RGB SELECT HD SELECT INPUT SKIP ALL RESET Explanation Selects aspect ratio of the displayed image. Press + or - to select. Controls the vertical position of the image within the Display area of the PDP. Press + to move up. Press - to move down. Controls the horizontal position of the image within the Display area of the PDP. Press + to move right. Press - to move left. Adjusts the vertical size of the image. Adjusts the horizontal size of the image. ON: H-Position, V-Position, Clock and Clock Phase are adjusted automatically. OFF: H-Position, V-Position, Clock and Clock Phase are adjusted manually. VGA and RGBHV input only. Adjusts the visual "noise" on the image. VGA and RGBHV input only. Press + to expand the width of the image on the right of the screen. Press - to narrow the width of the image on the left. VGA and RGBHV input only. ON: UNDERSCAN is selectable in the ASPECT MODE menu. OFF: UNDERSCAN item is not selectable in the ASPECT MODE menu. Video signal input only. ON: Information about inputs, screen size, etc. is shown. OFF: No information is shown. Change the position of the menu between 1 and 6. Press + or - to adjust. ON: The menu position intermittently shifts eight dots while the OSD is being displayed. OFF: The menu position does not shift. Adjusts the transparency level of the OSD. Press + or - to adjust. Selects the input type when using 5BNC connectors. RGB: For RGB input. COMP.: For Component input (3BNC connectors). SCART1: For SCART input (4BNC connectors). SCART2: For SCART input (3BNC connectors and VIDEO1 input). SCART1, SCART2 available for Europe and World-Wide models only. Selects the input type when using a mini D-SUB connector. RGB: For RGB input. SCART3: for SCART input. SCART3 available for Europe and World-Wide models only. If there is a problem with signal detection, this function forces the monitor to display the signal at the desired resolution. If no problem is detected, the only available option will be "AUTO". VGA and RGBHV input only. Manually selects signal output when similar 1080I signal are detected. 1080B: Standard digital broadcasts. 1080A: Special digital broadcasts (ex. DTC100). Skips to next input if present input signal is not detected. This function is valid only for INPUT key on the display. Resets settings back to factory default values. Default 0 0 0 0 OFF 0 0 OFF ON 1 OFF 70% RGB RGB AUTO 1080B OFF OFF Reset YES YES YES YES NO YES YES YES YES YES YES YES YES YES YES NO YES English-16