NEC 61XR3 Model Information - Page 11

Rear View/ Terminal Board C D E F G H I AB A AC IN Connect the included power cord here. B EXT SPEAKER L and R Connect speakers (optional) here. Maintain the correct polarity. Connect the (positive) speaker wire to the EXT SPEAKER terminal and the (negative) speaker wire to the EXT SPEAKER terminal on both LEFT and RIGHT channels. Please refer to your speaker's owner's manual. C VIDEO1, 2, 3 (BNC, RCA, S-Video) Connect VCR's, DVD's or Video Cameras, etc. here. D AUDIO1, AUDIO2, AUDIO3 These are audio input terminals. The input is selectable. Set which video image to allot them from the audio menu screen. E DVD1 / HD1 Connect DVD's, High Definition or Laser Discs, etc. here. F DVD2/ HD2, RGB2 DVD2/ HD2: You can connect DVDs, High Definition sources, Laser Discs, etc. here. This input can be set for use with an RGB or component source. (see page E-21) RGB2: You can connect an analog RGB signal and the syncronization signal. G RGB1 (D-Sub) Connect an analog RGB signal from a computer, etc. here. H DVD3/HD3, RGB3 (DVI) Connect a digital signal (TMDS) from a source with a DVI output. This input can be set for use with an RGB3 or DVD3/ HD3 source. (see page E-22) I EXTERNAL CONTROL (D-Sub) This terminal is used when operating and controlling the monitor externally (by RS-232C). Information • For Y/CB/Cr, connect to the DVD1 or DVD2 terminals. • For SCART, this unit provides three ways to connect: · SCART1: Connect R/G/B to the DVD2 terminals and composite sync. to the HD terminal. · SCART2: Connect R/G/B to the DVD2 terminals and composite sync. to the VIDEO1 terminal. · SCART3: Connect R/G/B + composite sync. to the RGB1 terminal. E-7 4-11