NEC 8M-B80AX1U 8M-B80AX1U Operation Manual - Page 94
INPUT, INPUT7, ENTER, Setup, Option, Terminal, setting, INPUT7 audio select, Audio input terminal
View all NEC 8M-B80AX1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
2/28/2019 Contents 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages. English (UK) >> Français >> Deutsch >> Italiano Español >> Polski >> English (US) >> Ver. 1.01 Sharp operation manual > AQUOS LINK and Other Devices < Connecting 8K output compatible Device Supported audio sound signals Type: Linear PCM Sampling frequency: 48kHz / 44.1kHz / 32kHz How to change the input audio sound Press INPUT on the remote control. During the display of the input change menu, press / to select "INPUT7", and press ENTER. Press MENU, followed by / / / and ENTER to select "Setup" - " (Option)" - "Terminal setting" - "INPUT7 audio select", then select input for audo sound. NOTE When "Audio input terminal" has been selected for "INPUT7 audio select", no sound will come out of the Monitor if you connect between the Monitor and a typical HDMI compatible device using an HDMI cable instead of an analog audio cable. (An analog audio cable needs to be connected) To connect the Monitor to a HDMI compatible device using an HDMI cable alone, select the input to which the device has been connected in "INPUT7 audio select". 5-4