NEC AS221WM AccuSync AS191WM-BK : user's manual - Page 7
Contents, Quick Start - manual
UPC - 805736031737
View all NEC AS221WM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
English Contents Your new NEC AccuSync LCD monitor box* should contain the following: • AccuSync LCD monitor with tilt base • Audio Cable • Power Cord • Video Signal Cable (15-pin mini D-SUB male to 15-pin mini D-SUB male) • Setup Manual • CD-ROM (only EU) • Base Stand CD-ROM Setup Manual Setup Manual Audio Cable Power Cord*1 Video Signal Cable Base Stand * Remember to save your original box and packing material to transport or ship the monitor. *1 Type of power cord included will depend on the where the LCD monitor is to be shipped. AccuSync LCD monitor (base stand not connected) Quick Start To attach the Base to the LCD Stand: 1. Attach the Base to the Stand. The locking tabs on the Stand should fit into the hole on the Base (Figure S.1). To attach the AccuSync LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC or MAC with DVI digital output: Connect the DVI signal cable (not included) to the connector of the display card in your system (Figure A.1). Tighten all screws. For the PC with Analog output: Connect the 15-pin mini D-SUB signal cable to the connector of the display card in your system (Figure A.2). Tighten all screws. For the MAC: Connect the Macintosh cable adapter (not included) to the computer and then attach the 15-pin mini D-SUB signal cable to the Macintosh cable adapter (Figure A.3). Tighten all screws. NOTE: Some Macintosh systems do not require a Macintosh cable adapter. Figure S.1 Stand Locking Tabs Base DVI Signal Cable (not included) Figure A.1 Figure A.2 Macintosh Cable Adapter (not included) Figure A.3 English-5