NEC ASLCD24WMCX-BK Manual for ASLCD22WMGX and ASLCD24WMCX - Page 17
Osd Message
UPC - 805736020021
View all NEC ASLCD24WMCX-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Controls -continued OSD MESSAGE Auto Config. Please Wait Input Not Supported 1). When an analog signal is displayed, and the "AUTO" button is pressed, this message will appear while the display is performing the Auto Configuration. 2). This message does not appear when digital signals are used. When the Hsync Frequency, Vsync Frequency or Resolution is out of the monitor's support range, will show this message. No Signal OSD Locked When the video cable is not connected, or the video cable is connected but there is no active signal input, this message will appear. After 9 seconds the monitor will enter power saving. This message location is at the position setting in "OSD Setup" item. When the OSD is unlocked, hold down the "Menu" key and press the "Power" key simultaneously to turn on the monitor, the OSD will be locked and show this message. When the OSD is locked, only the Power key functions are still working. If other keys are pressed, the OSD Locked" message will appear. When the OSD is locked, hold down the "Menu" key and press the "Power" key simultaneously to turn on the monitor, the OSD will be locked and show this message. Input Signal 1.) D-SUB: Analog PC source is selected. 2.) DVI: Digital PC source is selected. 3.) YPbPr: Analog Video source (Component) is selected. 4.) HDMI: Digital Video source (HDMI) is selected. 15