NEC C751Q Users Manual - English - Page 9
Changing handles position, Changing OEC logo ornament position, mounting
View all NEC C751Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English Changing handles position : Factory set position. : Alternate position. CAUTION: Four or more handles are required when transporting. Ensure the handles are attached by the removed screws. (Recommended Fasten Force: 139 - 189 N•cm) C651Q/C751Q C861Q Attaching Mounting Accessories The monitor is designed for use with the VESA mounting system. 1. Attach eyebolts (not included) for mounting This model is equipped with attachable eyebolts to aid in mounting. • Install the eyebolt brackets with the attached screws. (Recommended Fasten Force: 139 - 189 N•cm) • Screw the eyebolts into eyebolt holes in eyebolt brackets as shown in the picture. • Be sure eyebolts are secure. • In order to move the monitor into position, use a lifting device attached to the eyebolts. CAUTION: DO NOT mount the monitor using only the eyebolts. Eyebolts are for tentative use only. C981Q 2. Attach Mounting Accessories Be careful to avoid tipping the monitor when attaching accessories. VESA Mounting Interface (M8) Changing NEC logo ornament position When using the monitor in the portrait position, the NEC logo ornament position can be changed. Removing the logo ornament: unscrew the installed screw then take off the logo ornament. Attaching the logo ornament: make sure the holes for the screws on the logo ornament and the holes for the screws on the bezel are aligned. Install the logo ornament with the screws, which are used for installing the logo ornament. (Recommended Fasten Force: 30-40N•cm). Screw holes 400 mm Mounting accessories can be attached with the monitor in the face down position. To avoid scratching the LCD panel, always place a soft cloth, such as a blanket that is larger than the monitor's screen area, on the table before laying the monitor face down. Make sure there is nothing on the table that can damage the monitor. NOTE: Prior to installation, place the monitor face down on a flat even surface that is larger than the monitor screen. Use a sturdy table that can easily support the weight of the monitor. NOTE: You can use 600 mm/400 mm holes for mounting. 400 mm CAUTION: Do not use any other screw to install the logo ornament. English-7