NEC EA271U-BK User Manual - English - Page 10
Adjustable stand with pivot capability, E.1, Tilt and Swivel, Rotation, Raise and Lower
View all NEC EA271U-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
7. Connect the power cord to the power outlet. NOTE: Please refer to the CAUTION section of this manual for proper selection of the AC power cord. 8. Turn on the monitor by touching the power key on the front bezel and then turn on the computer (Figure E.1). NOTE: If you have any problems, please refer to the Troubleshooting section of this User's Manual. Figure E.1 Power key Adjustable stand with pivot capability Raise and Lower: Hold the monitor on each side and lift or lower to the desired height. Tilt and Swivel: Hold the top and bottom sides of the monitor screen with your hands and adjust the tilt and swivel as desired. Screen Rotation (Pivot): Hold the monitor on each side and turn it from landscape to portrait. You can adjust the OSD (On-Screen Display) menu rotation to match the screen rotation. Refer to the OSD ROTATION instructions (see page 19). Rotation, Raise and Lower Tilt and Swivel CAUTION: Handle with care when adjusting the monitor screen. Do not apply pressure to the LCD when adjusting the height and rotating the monitor screen. Before rotating, disconnect the power cord and all cables from the display. The screen must be raised to the highest level and tilt to avoid knocking the screen on the desk or pinching your fingers. English-8