NEC EX341R-BK Users Manual
NEC EX341R-BK Manual
 |
View all NEC EX341R-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC EX341R-BK manual content summary:
- NEC EX341R-BK | Users Manual - Page 1
Desktop Monitor MultiSync EX341R User's Manual Please find your model name in the label on the backside of monitor. - NEC EX341R-BK | Users Manual - Page 2
...English-10 Multiple monitors connection using DisplayPort English-12 Controls ...English-13 Specifications ...English-21 Features ...English-22 Troubleshooting ...English-23 Using the Zoom Function ...English-25 Human sensing function...English-26 Using the Auto Brightness function English-27 - NEC EX341R-BK | Users Manual - Page 3
be read carefully in order to avoid any problems. CAUTION: Please use the power cord provided serviced in the country where it was purchased. Windows is a registered trademark of Microsoft Corporation. NEC is a registered trademark of NEC Corporation. ErgoDesign is a registered trademark of NEC - NEC EX341R-BK | Users Manual - Page 4
has been tested and found instructions Problems." NEC Display Solutions of America, Inc. Address: 500 Park Boulevard, Suite 1100 Itasca, Illinois 60143 Tel. No.: (630) 467-3000 Type of Product: Display Monitor Equipment Classification: Class B Peripheral Model: MultiSync EX341R (EX341R-BK - NEC EX341R-BK | Users Manual - Page 5
a safe location then refer servicing to qualified service personnel under the following conditions. not operate normally by following operating instructions. • Allow adequate ventilation around the NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen - NEC EX341R-BK | Users Manual - Page 6
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for the display to warm up. • Adjust the monitor height so that the top of the screen is at or slightly below eye - NEC EX341R-BK | Users Manual - Page 7
English Contents For contents, please refer to the contents sheet. Quick Start To connect the LCD monitor to your system, follow these instructions: NOTE: Make sure to read "Recommended Use" (page 3) before installation. The accessories included will depend on the where the LCD monitor is to be - NEC EX341R-BK | Users Manual - Page 8
the AC inlet on the back of the monitor and the other end to the power outlet. NOTE: Please refer to Caution section of this manual for proper selection of AC power cord. English-6 - NEC EX341R-BK | Users Manual - Page 9
the computer and the monitor by touching the power button on the front bezel (Figure E.1). NOTE: If you have any problems, please refer to the Troubleshooting section of this User's Manual. Power key Figure E.1 Raise and Lower Monitor Screen The monitor may be raised or lowered in landscape mode. To - NEC EX341R-BK | Users Manual - Page 10
with a flexible arm. To prepare the monitor for alternate mounting purposes: • Follow the instructions provided by the manufacturer of the display mount. • To meet the safety requirements, the mounting stand must be able to support the weight of the monitor and be UL-certified. Remove Monitor Stand - NEC EX341R-BK | Users Manual - Page 11
English Mount Flexible Arm This LCD monitor is designed for use with a flexible arm. 1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand. 2. Use the 4 screws removed from the stand or the specified screws to attach - NEC EX341R-BK | Users Manual - Page 12
ControlSync ControlSync works controlling all connected sub monitors from master monitor simultaneously but also controlling a target monitor from master monitor by setting INDIVIDUAL ADJUST function (see page 19). Controlling all connected sub monitor (Synchronized control): 1. Connect the master - NEC EX341R-BK | Users Manual - Page 13
G, B, color gain VOLUME SOUND INPUT VIDEO DETECT DP OUT MULTISTREAM MULTI PICTURE PICTURE PATTERN RESPONSE IMPROVE OFF TIMER POWER SAVE TIMER LED BRIGHTNESS OFF OSD LOCK OUT HOT KEY SIGNAL INFORMATION SENSOR INFORMATION KEY GUIDE DATA COPY CUSTOMIZE SETTING MONITOR NO. TARGET MONITOR NO. INDIVIDUAL - NEC EX341R-BK | Users Manual - Page 14
DisplayPort cable DisplayPort cable When the monitor has no image, follow the troubleshooting step Recovering from no image and select DP VER "1.1" (below). card. Check to make sure that the display card supports MST (multi-stream transport). Contact your supplier for detailed information. NOTE - NEC EX341R-BK | Users Manual - Page 15
off.*1 You can adjust the VOLUME directly by touching DOWN while the OSD menu is off.*1 Resets the OSD controls back to factory settings. Selects MULTI PICTURE when OSD menu is off*2. Turns the monitor on and off. Indicates that the power is on or off. *1 When Hot Key function is - NEC EX341R-BK | Users Manual - Page 16
Color Control System is set to DICOM SIM. This function works only when MULTI PICTURE is off. AUTO BRIGHTNESS OFF: No function. ON (AMBIENT LIGHT): Color Control System is set to DICOM SIM. This function works only when MULTI PICTURE is off. BLACK LEVEL Adjusts the black level. OFF MODE SETTING The - NEC EX341R-BK | Users Manual - Page 17
when Color Control System is set to L/B, PROGRAMMABLE or DICOM SIM. STANDARD is used for TCO Certificate compliance. DYNAMIC works only when MULTI PICTURE is off. SCREEN LEFT / RIGHT Controls horizontal image position within the display area of the LCD. DOWN / UP Controls vertical image position - NEC EX341R-BK | Users Manual - Page 18
image is not expanded. NOTE: Full does not work when MULTI PICTURE is Left or Right. When MULTI PICTURE is sub, FULL does not change picture height and environment by a single standard RGB color space. With this color-supported environment, the operator could easily and confidently communicate color - NEC EX341R-BK | Users Manual - Page 19
the size of the picture. AUTO: Shows 2 screens based on the INPUT RESOLUTION and EXPANSION settings for the priority (adjustable) screen selected in MULTI PICTURE. CENTER: Splits 2 screens divided evenly from the center. When "Main" or "Sub" is selected in MUTI PICTURE, selects the position of the - NEC EX341R-BK | Users Manual - Page 20
back to the factory settings except Language, OSD Lock Out and items in Multi Display tag. Individual settings can be reset by touching the " /RESET" the front keys. ON: The " /RESET" key on the bezel is enabled MULTI PICTURE settings. Touch the UP key to show brightness menu. The LEFT/RIGHT keys - NEC EX341R-BK | Users Manual - Page 21
If you select "ON", the Key Guide appears on screen when the OSD menu is accessed. DATA stored. To restore settings: Hold "MENU" for 3 seconds or more while the OSD menu is off. MULTI DISPLAY MONITOR NO. This function is for INDIVIDUAL ADJUST. To set monitor number to each monitor. Controlling sub - NEC EX341R-BK | Users Manual - Page 22
your monitor. OSD Warning OSD warning menus disappear when EXIT is selected. NO SIGNAL: This function gives a warning when there is no horizontal or vertical sync. After power is turned on or when there is a change of input signal, the No Signal window will appear. OUT OF RANGE: This function gives - NEC EX341R-BK | Users Manual - Page 23
MultiSync EX341R Notes LCD Module Diagonal: 86.43 cm/34.0 inches Viewable Image Size: 86.43 cm/34 gray Typ.) Resolutions Supported 720 x 400*1: VGA text Some systems may not support all modes listed. x 1440 @ 30 Hz to 60 Hz NEC DISPLAY SOLUTIONS cites recommended. Active Display Area - NEC EX341R-BK | Users Manual - Page 24
A designated main monitor can adjust sub monitor(s) by OSD. It is good for multi-setting monitors which are positioned far from the user. Human/Ambient Sensors: Controls screen operating carbon footprints are calculated by a unique algorithm developed exclusively by NEC for its monitors. English-22 - NEC EX341R-BK | Users Manual - Page 25
that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics erase the image. NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever - NEC EX341R-BK | Users Manual - Page 26
make sure the USB cord is properly connected. Refer to your USB device User's Manual. • Check if the USB upstream port on the monitor is connected to the USB setting. • Check to make sure that the display card supports MST (multi-stream transport). • The number of monitors daisy-chained through SST - NEC EX341R-BK | Users Manual - Page 27
English Using the Zoom Function Allows you to use the entire screen area, significantly expanding the size. Allows the picture displayed in the center to expand. SETUP 1. Select FULL or ASPECT in EXPANSION to activate the Zoom function (see page 16). EXPANSION OFF 2. Set a resolution via H. - NEC EX341R-BK | Users Manual - Page 28
Human sensing function Human sensing function reduces power consumption by detecting the movement of a person. The HUMAN SENSING has following two settings: MODE LIGHT DEEP HUMAN SENSING SETTING 1 2 No person in front of the monitor BRIGHTNESS 0% Power saving mode Image of human sensing - NEC EX341R-BK | Users Manual - Page 29
English Using the Auto Brightness function The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient lighting within the room. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dim accordingly. - NEC EX341R-BK | Users Manual - Page 30
latest independent standards from agencies such as ISO (International Organisation for Standardization) and TCO (Swedish Trades Union). Disposing of your old NEC product The aim of recycling is to gain an environmental benefit by means of re-use, upgrading, reconditioning or reclamation of material
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
 |
 |
Desktop Monitor
MultiSync EX341R
User’s Manual
Please find your model name in the label on the backside of monitor.