NEC LCD1720M BK MultiSync LCD1720M User's Manual - Page 8
Tilt and swivel, Remove Monitor Stand for Mounting - driver
View all NEC LCD1720M BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Quick Start -continued Tilt and swivel Grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired (Figure TS.1). Remove Monitor Stand for Mounting To prepare the monitor for alternate mounting purposes: 1. Disconnect all cables. 2. Place monitor face down on a non-abrasive surface. Insert a screw driver (or similar object) into the hole on the bottom of stand. As shown in the picture, hold the stand cover in hand and lift up gradually by the stick and then remove (Figure R.1). Figure TS.1 3. Remove the 4 screws connecting the monitor to the stand and lift off the stand Figure R.1 assembly (Figure R.2). The monitor is now ready for mounting in an alternate manner. 4. Connect the AC cord, signal cable and Audio cable to the back of the monitor (Figure R.3). 5. Reverse this process to reattach stand. NOTE: Use only VESA-compatible alternative mounting method. Figure R.2 Non-abrasive surface Figure R.3 6