NEC LCD1765 MultiSync LCD1565 / LCD1765 User's Manual - Page 14
Monitor, MultiSync, Notes, Specifications - r 17 tft lcd monitor
UPC - 805736008135
View all NEC LCD1765 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Specifications Monitor Specifications LCD Module with Diagonal : Acrylic Panel Viewable Image Size : Native Resolution (Pixel Count) : Input Signal Video : Sync : Display Colors Maximum Viewing Angles with Acrylic Panel Synchronization Range Resolutions Supported Left/Right : Up/Down : Horizontal : Vertical : Active Display Area Tilt Power Supply Dimensions Horizontal : Vertical : Top Hinge: Bottom Hinge: Net: Gross: Weight Net: Gross: Environmental Considerations Operating Temperature : Humidity : Feet : Storage Temperature : Humidity : Feet : MultiSync® LCD1765™ Monitor Notes 17.0 inch 17.0 inch 1280 x 1024 Active matrix; thin film transistor (TFT) liquid crystal display (LCD); 0.264 mm dot pitch; 225cd/m2 white luminence; 400:1 contrast ratio, typical ANALOG 0.7 Vp-p/75 Ohms Separate sync. TTL Level Horizontal sync. Positive/Negative Vertical sync. Positive/Negative Over 16 million colors Dependent on display card used. 80°/80° (CR>5) 70°/70° (CR>5) 31.5 kHz to 81.1 kHz 56.0 Hz to 75.0 Hz Automatically Automatically 720 x 400*1 :VGA text 640 x 480*1 @ 60 Hz to 75 Hz Some systems may not support all modes listed. 800 x 600*1 @ 56 Hz to 75 Hz 832 x 624*1 @ 75 Hz 1024 x 768*1 @ 60 Hz to 75 Hz 1152 x 864*1 @ 75 Hz 1152 x 870*1 @ 75 Hz NEC-Mitsubishi Electronics Display cites 1280 x 1024 @ 60 Hz to 75 Hz recommended resolution at 60 Hz for optimal display performance. 337.9 mm/13.3 inches 270.3 mm/10.6 inches Up 20˚, Down -5˚ 50˚ fixed 100 - 240 V ~ 50/60 Hz 421.9 mm (W) x 389 mm (H) x 243.6 mm (D) 16.6 inches (W) x 15.3 inches (H) x 9.6 inches (D) 520 mm (W) x 425 mm (H) x 155 mm (D) 20.5 inches (W) x 16.7 inches (H) x 6.1 inches (D) 13.2 lbs/6.0 kg 17.6 lbs/8.0 kg 5°C to 35°C/41°F to 95°F 30% to 80% 0 to 10,000 Feet -10°C to 60°C/14°F to 140°F 10% to 85% 0 to 40,000 Feet *1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done. NOTE: Technical specifications are subject to change without notice. LCD15651765manual.p65 12 12 5/27/03, 8:31 AM