NEC LCD1770NXM-2 MultiSync 1770V/1770NX/1770NXM Users Manual - Page 18
NXM
UPC - 805736018271
View all NEC LCD1770NXM-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Specifications -continued Monitor Specifications LCD Module Diagonal : Viewable Image Size : Native Resolution (Pixel Count) : Input Signal Video : Sync : Display Colors Maximum Viewing Angles Synchronization Range Resolutions Supported Left/Right : Up/Down : Horizontal : Vertical : Active Display Area USB Hub Horizontal : Vertical : I/P: Port: Speakers Power Supply Current Rating Dimensions Load Current: Practical Audio Output: Weight Environmental Considerations Operating Temperature : Humidity : Feet : Storage Temperature : Humidity : Feet : MultiSync® LCD1770NXM Notes Monitor 17.0 inch 17.0 inch 1280 x 1024 Active matrix; thin film transistor (TFT) liquid crystal display (LCD); 0.264 mm dot pitch; 250cd/m2 white luminence; 500:1 contrast ratio, typical ANALOG 0.7 Vp-p/75 Ohms Separate sync. TTL Level Horizontal sync. Positive/Negative Vertical sync. Positive/Negative Digital Input: DVI 16,194,277 Dependent on display card used. 80°/80° (CR>5) 85°/75° (CR>5) 31.5 kHz to 81.0 kHz (Analog) 31.5 kHz to 69.0 kHz (Digital) 56.0 Hz to 75.0 Hz Automatically Automatically Automatically 720 x 400*1 :VGA text Some systems may not support all modes listed. 640 x 480*1 @ 60 Hz to 75 Hz 800 x 600*1 @ 56 Hz to 75 Hz 832 x 624*1 @ 75 Hz 1024 x 768*1 @ 60 Hz to 75 Hz 1152 x 870*1 @ 75 Hz 1280 x 1024 @ 60 Hz to 75 Hz (Analog) ......... NEC-Mitsubishi Electronics Display cites 1280 x 1024 @ 60 Hz (Digital) recommended resolution at 60 Hz for optimal display performance. 337.9 mm/13.3 inches 270.3 mm/10.6 inches USB Specification Revision 2.0 Upstream 1 Downstream 4 Maximum 0.5A per port 2.0 W + 2.0 W 100 - 240 V ~ 50/60 Hz 0.7 - 0.36A 367.0 mm (W) x 368.6-472.5 mm (H) x 198.0 mm (D) 14.4 inches (W) x 14.5-18.6 inches (H) x 7.8 inches (D) 6.5 kg 14.3 lbs 5°C to 35°C/41°F to 95°F 30% to 80% 0 to 10,000 Feet -10°C to 60°C/14°F to 140°F 10% to 85% 0 to 30,000 Feet *1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done. NOTE: Technical specifications are subject to change without notice. 16 LCD17PISAManual080604.p65 16 8/6/04, 5:15 PM