NEC LCD1935NXM MultiSync LCD1731_1935NXM User's Manual - Page 6
Quick Start - multisync manual
View all NEC LCD1935NXM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Quick Start To attach the MultiSync® LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC or MAC with DVI digital output: Connect the DVI signal cable (not included) to the connector of the display card in your system (Figure A). Tighten all screws. For the PC with Analog output: Connect the 15-pin mini D-SUB signal cable to the connector of the display card in your system. Tighten all screws. For the MAC: Connect the MultiSync Macintosh cable adapter to the computer, then attach the 15-pin mini D-SUB signal cable to the MultiSync Macintosh cable adapter. Tighten all screws. NOTE: To obtain the MultiSync Macintosh cable adapter or DVI-D cable, call NECMitsubishi Electronics Display of America, Inc. at (800) 632-4662. 4. Connect the 15-pin mini D-SUB of the video signal cable or DVI signal cable (not included) to the appropriate connector on the back of the monitor (Figure A). 5. Connect the audio cable to "AUDIO INPUT" on the back of the monitor and the other end to the "Audio out" terminal of the computer (Figure B). 6. Plug the captive power cord into the AC adapter and power cord into a wall socket (Figure C). NOTE: If you use this monitor at AC125-240V, please refer to Recommended Use section of this manual for proper selection of power cord. NOTE: For download information on the Windows® 95/98/Me/2000/XP INF file for your monitor, refer to the References section of this User's Manual. NOTE: If you have any problems, please refer to the Troubleshooting section of this User's Manual. Figure A Figure B Figure C DVI VGA Audio Jack Outlet AC Adapter Power Jack 4 LCD35Seriesmanual071904.p65 4 7/19/04, 7:24 AM