NEC LCD2090UXi-BK MultiSync LCD2090UXi-1 : User's Manual for MultiSync LCD2090 - Page 20
The Advanced No Touch Auto Adjust function is able to recog - 1 touch screen
UPC - 805736016154
View all NEC LCD2090UXi-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Advanced OSM Controls - continued Tag 3 AUTO ADJUST LEVEL (Analog input only) Determines which items are to be adjusted when the AUTO ADJUST function is activated. The choices are "SIMPLE" "FULL", and "DETAIL". Press "Left" or "Right" to select. Size, Fine, Contrast Black Level, Long Time Position Cable capability** SIMPLE O X X 1 Sec. FULL O O X 1.5 Sec. DETAIL* O O O 5 Sec. O: Automatic Adjustment X: No Automatic Adjustment * "DETAIL" activates automatic long cable (skew, peaking) adjustment. ** Black level, RGB sharpness, RGB delay and RGB position can be adjusted using the Long Cable Software. To download the software, please visit www.necdisplay.com. A-NTAA SW (Analog input only) The Advanced No Touch Auto Adjust function is able to recognize new signals even when neither the resolution nor the refresh rate has changed. If several PCs are connected to the monitor, and each transmit very similar (or even the same) signals in terms of resolution and refresh rates, the monitor recognizes that there is a new signal and automatically optimizes the picture without the need for any action on the part of the user. OFF: A-NTAA is disabled. ON: If a change in signal is detected A-NTAA will adjust the monitor to the optimal settings for the new signal. If no change in the signal is detected then A-NTAA does not activate. The screen will be blank while the monitor optimizes the signal. OPTION: Functions the same as ON, except that the screen does not go blank when the monitor makes adjustments for changes in signal, allowing the monitor to display the new signal faster. When using an external switching device to connect 2 or more PCs to the monitor,using either the ON or OPTION setting is suitable. 18