NEC LCD2190UXP-BK MultiSync LCD2190UXp-BK : LCD2190UXp User Manual - Page 23
AUTO: When using the DVI-D to DVI-D cable, the DVI SELEC - 21
UPC - 805736015645
View all NEC LCD2190UXP-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Advanced OSM Controls - continued Tag 7 SHARPNESS DVI SELECTION VIDEO DETECT OFF TIMER IPM (Intelligent Power Manager) IPM SETTING This function is digitally capable of keeping an image crisp at any resolution at any time. This setting can be set independently for different signal timings (resolution settings). This function selects the DVI input mode. If the DVI selection changes, you must restart your computer. AUTO: When using the DVI-D to DVI-D cable, the DVI SELECTION is DIGITAL. When using the D-SUB to DVI-A cable, the DVI SELECTION is ANALOG. DIGITAL: DVI digital input is available. ANALOG: DVI analog input is available. Selects the method of video detection when more than one video input is connected. FIRST: If "FIRST" is selected as the VIDEO DETECT option, the monitor displays the signal from the first input port. If there is no signal present at the first input port, then the monitor will search for a signal from the next input port. If a new input signal is connected to another of the monitor's input ports while the monitor is in FIRST mode, the monitor will not switch automatically to the new source. LAST: If "LAST" is selected as the VIDEO DETECT option, then each time a new input source is detected, the monitor automatically displays the new signal. NONE: The monitor will only search other input ports while the power is on. Monitor will automatically power off after a user-determined length of time passes. Before powering off, a message will appear on the screen asking the user if they want to delay the turn off time by 60 minutes. Press any OSM button to delay the turn off time. The Intelligent Power Manager allows the monitor to enter into a power saving mode after a period of inactivity. The IPM has three settings. OFF: Monitor does not go into power save mode when the input signal is lost. STANDARD: Monitor enters power save mode automatically when the input signal is lost. OPTION: Monitor enters power save mode automatically when the amount of surrounding light goes below the level that is determined by the user. Adjusts the luminance value for IPM. 21