NEC LCD224WXM-BK LCD174WXM/194WXM/224WXM UM - Page 8
Removing the Base, Connecting a Flexible Arm - monitor
UPC - 805736021226
View all NEC LCD224WXM-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Quick Start - continued Removing the Base Note: Always remove the Base when shipping the LCD. 1. Place monitor face down on a non-abrasive surface. 2. Using your fingers, press the 3 release tabs on left or right side at the same time to unlock the Base. 3. Using your fingers, press the 3 release tabs on the other side at the same time to unlock the Base. 4. Pull out the unlocked Base. Release Tab Connecting a Flexible Arm This LCD monitor is designed for use with a flexible arm. Please use the attached screws (4pcs) as shown in the picture when installing. To meet the safety requirements, the monitor must be mounted to an arm which guaranties the necessary stability under consideration of the weight of the monitor. The LCD monitor should only be used with an approved arm (e.g. GS mark). NOTE: The mounting stand must be able to sustain at least 15kg (LCD174WXM), 19kg (LCD194WXM), 21kg (LCD224WXM) and be UL certified. 12mm M4 4 x 12mm with lock washer and flat washer 100 mm Thickness of Bracket (Arm) 2.0~3.2 mm Tighten all screws. 4 SCREWS (M4) (MAX depth: 10.0 mm) If using other screws, check depth of holes. 100 mm Weight of LCD assembly: LCD174WXM : 3.4 kg (MAX) LCD194WXM : 4.3 kg (MAX) LCD224WXM : 4.8 kg (MAX) 6