NEC LCD2490WUXIBKSV MultiSync LCD2090UXi-BK-SV : MultiSync Spectraview Spec Br - Page 2

SpectraViewII Color Calibration Solution Features and Benefits 10-/12-bit Internal Look Up Tables (LUTs) - Each LCD monitor supported by SpectraViewII features three internal 12-bit LUTs (10 bits on LCD2180WGLED model). These tables allow precise adjustments to be made to the display's tone response curve with minimal reduction to the number of displayable colors. Since the tone response curve correction is stored within the display and not on the host system's video graphics card LUT, the display can be calibrated on one machine and then used on another and still maintain calibration as long as a digital video signal is used. Display Data Channel Command Interface (DDC/CI) - SpectraViewII communicates with the monitor using DDC/CI, which is a two-way communications link between the video graphics adapter and display monitor using the standard video signal cable. No extra cables are necessary. All adjustments to the monitor settings are done automatically using this communications link. Multiple calibration sets - Different monitor calibrations can be instantly loaded, allowing quick and easy switching between different calibration settings without the need to re-calibrate the display. Each time a calibration set is loaded, the necessary monitor settings and ICC/ColorSync profiles are automatically updated. Calibrated display information - At the end of each monitor calibration, an information window is displayed, which shows the results of the calibration and includes a wealth of information about the display such as the measured color gamut, grayscale color tracking, Delta-E and luminance values. Additional information about the display monitor such as the model name, serial number and the total number of hours that it has been in use are also displayed. Calibration status validation - SpectraViewII will query each calibrated monitor to see if any controls have changed since the last calibration. If anything has changed, the previous calibrated state can be restored automatically. Application flexibility - SpectraViewII provides many features and options that make it flexible enough to be used in a large variety of applications, including full DICOM support for medical imaging. The display luminance can be adjusted to either a specific user-defined value or set to the maximum the display can achieve. In addition, custom target response curves can be created in addition to presets such as L* and SMPTE. Network support (Windows only) - SpectraViewII integrates with the NEC NaViSet™ Administrator network software (available separately from your NEC representative) to provide remote network access and monitoring of display monitors. NaViSet Administrator is able to read, display and log the current calibration settings and status of displays on an existing network (LAN). This feature is particularly useful for large installations where central monitoring and asset management is needed. Monitor locking - Once calibrated, the On Screen Display (OSD®) controls for the display monitors can be locked to prevent accidental or unauthorized adjustment, which may invalidate the calibrated state of the monitor. Monitor profiling - After calibration, the display is automatically profiled and highly accurate ICC/ColorSync color profiles are generated and automatically registered with the color management system. These profiles use the Bradford Chromaticity Adaptation matrix. Colorimeter function - The software features a colorimeter function, which allows direct measurements to be taken by the color sensor and the results displayed in a variety of different formats. The 21.3" NEC MultiSync® LCD2180WG LED, the world's first LED-backlit LCD desktop display, delivers new levels of image detail and color scale to professional-level users in the areas of computer graphics, digital animation, medical imaging, pre-press production and film, video and photo editing. Chosen from only the top 5% of the manufacturer's production, the LEDs used for this display meet stringent purity and light output vs. power requirements. Using LEDs as the backlight source in lieu of normal fluorescent tubes, the LCD2180WG LED reveals an amazingly broad color gamut without loss of luminance. This state-of-the-art technology is able to produce more detail and greater nuances on digital images than any other LCD or CRT on the market today. ColorComp™ compensates for the differences with the screen's white uniformity and improves the color and luminance uniformity of the display 10-bit internal look-up tables (LUTs) allow the monitor to display from a color palette of more than 1 billion colors as well as precise adjustments to be made to the display's tone response curve without reducing the number of displayable colors Built-in feedback maintains color stability and better color tracking compared to CCFL True 10-bit digital video input designed for compatibility with future 10-bit video cards and operating systems XtraView+™ technology allows for 176° viewing angle from all directions MultiSync LCD2180WG LED features include: Wide color gamut achieves 107% size/100% coverage of Adobe RGB Environmentally friendly and RoHS compliant due to omission of CCFL lighting source Variable whitepoint system backlight is achieved by varying the relative intensity of the red, green and blue LEDs and results in no loss of luminance or available LUT levels when the whitepoint is adjusted between 5000-9300K) Built-in color feedback system stabilizes target color in one minute after power is turned on vs. up to 30 minutes for standard desktop LCDs. The system also maintains the stability of color over time Passive cooling system results in no fan noise or moving mechanical parts Dual DVI connectivity allows for multicomputer configurations through a single monitor, significantly improving productivity