NEC LCD4020-TMX4 LCD5220/LCD4020-2/LCD4620-2 UM - Page 26

Setting PICTURE BRIGHTNESS Adjusts the overall image and background brightness. Press + or - to adjust. CONTRAST Adjusts the image brightness in relationship to the background. Press + or - to adjust. Note: The sRGB picture mode is standard and cannot be changed. SHARPNESS Adjusts the crispness of the image. Press + or - to adjust. BLACK LEVEL Adjusts the image brightness in relationship to the background. Press + or - to adjust. Note: The sRGB picture mode is standard and cannot be changed. TINT* Adjusts the tint of the screen. Press + or - to adjust. HDMI, DVD/HD, VIDEO, TV inputs only COLOR* Adjusts the color depth of the screen. Press + or - to adjust. HDMI, DVD/HD, VIDEO, TV inputs only COLOR TEMPERATURE Adjusts the color temperature of the entire screen. A low color temperature will make the screen reddish. A high color temperature will make the screen bluish. Note: The sRGB picture mode is set to a predefined 6500 K standard and cannot be changed. COLOR CONTROL DVI, VGA, RGB/HV, HDMI inputs only Adjusts the levels of the Red, Yellow, Green, Cyan, Blue, Magenta and Saturation. Note: The sRGB picture mode is standard and cannot be changed. GAMMA SELECTION Select a display gamma for best picture quality. Note: The sRGB picture mode is standard and cannot be changed. NATIVE Gamma correction is handled by the LCD panel. 2.2 Typical display gamma for use with a PC. 2.4 Good for video (TV, DVD, etc.) S GAMMA Special gamma for certain types of movies. Raises the dark parts and lowers the light parts of the image. (S-Curve) DICOM SIM. DICOM GSDF curve simulated for LCD type. PROGRAMMABLE A programmable gamma curve can be loaded using NEC software. ADAPTIVE CONTRAST* Sets the level of adjustment for dynamic contrast. HDMI, DVD/HD, VIDEO, TV inputs only OFF MID HIGH MOVIE SETTINGS* NOISE REDUCTION Adjusts the amount of noise reduction. Press + or - to adjust. TV, VIDEO inputs only FILM MODE Selects Film mode. HDMI, DVD/HD, VIDEO, TV inputs only PICTURE RESET ADJUST Resets the following settings within the PICTURE menu back to factory setting: BRIGHTNESS, CONTRAST, SHARPNESS, BLACK LEVEL, TINT, COLOR, COLOR TEMPERATURE, COLOR CONTROL , GAMMA SELECTION, ADAPTIVE CONTRAST, MOVIE SETTINGS. AUTO SETUP VGA, RGB/HV inputs only Automatically adjusts Screen Size, H position, V position, Clock, Clock Phase, White Level, and Black Level. AUTO ADJUST VGA, RGB/HV inputs only H Position, V Position and Clock Phase are adjusted automatically upon power on. H POSITION Controls the horizontal position of the image within the Display area of the LCD. Press + to move right. Press - to move left. V POSITION Controls the vertical position of the image within the Display area of the LCD. Press + to move up. Press - to move down. CLOCK VGA, RGB/HV inputs only Press + to expand the width of the image on the right of the screen. Press - to narrow the width of the image on the left. *: The product you purchased may not have this feature. English-24 Default *1 *2 *3 *4 *5 *6 *7 *8 *9 *10 6 AUTO - OFF -