NEC LCD52VM bk AccuSync 52VM/72VM User's Manual - Page 14

Specifications - white

Page 14 highlights

Specifications Monitor Specifications LCD Module Diagonal: Viewable Image Size: Native Resolution (Pixel Count): Input Signal Video: Sync: Display Colors Maximum Viewing Angles Synchronization Range Resolutions Supported Analog input: Left/Right: Up/Down: Horizontal: Vertical: Active Display Area Horizontal : Vertical : Power Supply Speaker Practical Audio Output Current Rating Dimensions Weight Environmental Considerations Operating Temperature: Humidity: Feet: Storage Temperature: Humidity: Feet: AccuSync LCD52VM Monitor Notes 15.0 inch 15.0 inch 1024 x 768 Active matrix; thin film transistor (TFT) liquid crystal display (LCD); 0.297 mm dot pitch; 250cd/m2 white luminence; 400:1 contrast ratio, typical ANALOG 0.7 Vp-p/75 Ohms Separate sync TTL Level (Positive/Negative) Horizontal sync Positive/Negative Vertical sync Positive/Negative 16,194,277 Depending on display card used. 60°/60° (CR>10) 45°/45° (CR>10) 31.5 kHz to 61 kHz 55 Hz to 76 Hz Automatically Automatically 720 x 400*1 :VGA text Some systems may not support 640 x 480*1 at 60 Hz to 75 Hz all modes listed. 800 x 600*1 at 56 Hz to 75 Hz 832 x 624*1 at 75 Hz 1024 x 768 at 60 Hz to 75 Hz NEC DISPLAY SOLUTIONS cites recommended resolution at 60 Hz for optimal display performance. 304.1 mm/12.0 inches 228.1 mm/9.0 inches 100-240 V ~ 50/60 Hz 1 + 1 Watts 0.5 - 0.3A/100-240V 344.6 mm (W) x 352.7 mm (H) x 165 mm (D) 13.6 inches (W) x 13.9 inches (H) x 6.5 inches (D) 3.3 kg 7.3 lbs 5°C to 35°C/41°F to 95°F 30% to 80% 0 to 10,000 Feet -10°C to 60°C/14°F to 140°F 10% to 85% 0 to 40,000 Feet *1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current flat panel technologies when displaying nonnative resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done. NOTE: Technical specifications are subject to change without notice. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46

12
Specifications
Monitor
AccuSync LCD52VM
Notes
Specifications
Monitor
LCD Module
Diagonal:
15.0 inch
Active matrix; thin film transistor (TFT)
Viewable Image Size:
15.0 inch
liquid crystal display (LCD); 0.297 mm dot
Native Resolution (Pixel Count):
1024 x 768
pitch; 250cd/m
2
white luminence;
400:1 contrast ratio, typical
Input Signal
Video:
ANALOG 0.7 Vp-p/75 Ohms
Sync:
Separate sync TTL Level (Positive/Negative)
Horizontal sync Positive/Negative
Vertical sync Positive/Negative
Display Colors
Analog input:
16,194,277
Depending on display card used.
Maximum
Left/Right:
60
°
/60
°
(CR>10)
Viewing Angles
Up/Down:
45
°
/45
°
(CR>10)
Synchronization
Horizontal:
31.5 kHz to 61 kHz
Automatically
Range
Vertical:
55 Hz to 76 Hz
Automatically
Resolutions Supported
720 x 400*
1
:VGA text
Some systems may not support
640 x 480*
1
at 60 Hz to 75 Hz
all modes listed.
800 x 600*
1
at 56 Hz to 75 Hz
832 x 624*
1
at 75 Hz
1024 x 768 at 60 Hz to 75 Hz
..................
NEC DISPLAY SOLUTIONS cites
recommended resolution at 60 Hz for
optimal display performance.
Active Display Area
Horizontal :
304.1 mm/12.0 inches
Vertical :
228.1 mm/9.0 inches
Power Supply
100
-240 V
~ 50/60 Hz
Speaker Practical Audio Output
1 + 1 Watts
Current Rating
0.5 - 0.3A/100-240V
Dimensions
344.6 mm (W) x 352.7 mm (H) x 165 mm (D)
13.6 inches (W) x 13.9 inches (H) x 6.5 inches (D)
Weight
3.3 kg
7.3 lbs
Environmental Considerations
Operating Temperature:
5
°
C to 35
°
C/41
°
F to 95
°
F
Humidity:
30% to 80%
Feet:
0 to 10,000 Feet
Storage Temperature:
-10
°
C to 60
°
C/14
°
F to 140
°
F
Humidity:
10% to 85%
Feet:
0 to 40,000 Feet
*
1
Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different.
This is
normal and necessary for all current flat panel technologies when displaying nonnative resolutions full screen. In flat panel technologies, each
dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE: Technical specifications are subject to change without notice.