NEC LCD52VM User Manual - Page 4
Contents, Quick Start - 15
UPC - 805736011425
View all NEC LCD52VM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
English Contents Your new NEC AccuSync LCD monitor box* should contain the following: • AccuSync LCD monitor with tilt base • Audio Cable • Power Cord • Video Signal Cable • User's Manual • CD-ROM • Base Stand • Cable Holder Cable Holder CD-ROM User's Manual Audio Cable Power Cord Video Signal Cable Base Stand * Remember to save your original box and packing material to transport or ship the monitor. AccuSync LCD monitor (base stand not connected) Quick Start To attach the Base to the LCD Stand: 1. Insert the front of the LCD stand into the holes in the front of the Base (Figure S.1). 2. Next, position the locking tabs on the back side of the LCD stand with the holes on the Base. Lower the Stand in place until locking tabs are secure (Figure S.1). To attach the Cable Holder: 1. Insert the tabs of Cable Holder into the hole of Stand neck (Figure S.1). NOTE: Please confirm that the tabs are completely secure. Stand Locking Tabs Cable Holder Base Figure S.1 Figure A.1 Macintosh Cable Adapter (not included) Figure A.2 To attach the AccuSync LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC with Analog output: Connect the 15-pin mini D-SUB signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws. For the Mac: Connect the MultiSync Macintosh cable adapter (not included) to the computer. Attach the 15-pin mini D-SUB signal cable to the MultiSync Macintosh cable adapter (Figure A.2). Tighten all screws. NOTE: Some Macintosh systems do not require a Macintosh cable adapter. English-3