NEC LCDMT1045 User Manual - Page 8
Top Features
View all NEC LCDMT1045 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Top Features 1 SOURCE MENU 2 AUTO ADJUST 3 4 SELECT 5 6 L E NTER CANCE 7 STATUS POWER 9 ON/OFF 8 1 Source Button Use this button to select a video source such as a PC, VCR, DVD player or PC Card Viewer (PC card installed). 2 Auto Adjust Button Use this button to adjust Position-H/V and Pixel Clock/Phase for an optimal picture. Some signals may not be displayed correctly or take time to switch to another. 3 Menu Button Displays the main menu for operation. 4 Select (vw Buttons vw: Use these buttons to select the menu of the item you wish to adjust. ᮤ ᮣ: Use these buttons to change the level of a selected menu item. A press of the ᮣ button executes the selection. When no menus appear, these ᮤ ᮣ buttons work as a volume control. When the pointer is displayed, these ᮤ ᮣ vw buttons move the pointer. 5 Enter Button Executes your menu selection and activates items selected from the menu. 6 Cancel Button Press this button to exit "Menus". Press this button to return the adjustments to the last condition while you are in the adjustment or setting menu. 7 Status Indicator When this is lit red continually, it's warning you that the projection lamp has exceeded 2000 hours (1500 hours : MT1045) of service. After this light appears, it is advisable to replace the projection lamp as soon as possible. (See page E-33) In addition the message "LAMP USAGE XX HOURS" appears continually when the on-screen menu is not displayed. If this light blinks red rapidly, it indicates that the lamp cover or filter cover is not attached properly or the projector is overheated. See the Status Light Messages on page E-35 for more details. 8 Power Indicator When this indicator is green, the projector is on; when the indicator is amber, it is in standby mode. 9 Power Button Use this button to turn the power on and off when the power is supplied and the projector is in standby mode. NOTE: To turn off the projector, press and hold this button for minimum of two seconds. E-8