NEC M46-AV M40/M46 User Manual - Page 23

English 3) Connect external equipment. • To protect the external equipment, turn off the main power before making connections. • Refer to your equipment user manual for further information. 4) Connect the supplied power cord. • The equipment should be installed close to an easily accessible power outlet. • Please attach power cord to the LCD monitor by attaching the screw and clamp. • Fully insert the prongs into the power outlet socket. A loose connection may cause image degradation. NOTE: If you use this monitor at AC 220 - 240V, please refer to "Safety Precautions and Maintenance & Recommended Use" sections of this manual for proper selection of AC power cord. 5) Switch on the power of all the attached external equipment. When connected with a computer, switch on the power of the computer first. 6) Operate the attached external equipment. Display the signal from the desired input source. Setup - continued 7) Adjust the sound Make volume adjustments as required. 8) Adjust the screen (See page 27). Make adjustments of the screen display position when necessary. 9) Adjust the image (See page 27). Make adjustments such as brightness or contrast when required. 10) Recommended Adjustments To reduce the risk of the "image persistence", please adjust the following items based on the application being used: "DATE & TIME" and "SCHEDULE SETTINGS" (See pages 28 and 29) "SCREEN SAVER", and "SIDE BORDER COLOR" (See page 30) It is recommended that the "FAN CONTROL" setting (see page 30) be turned to ON also. Screw Clamp Screwhole for Clamp Denotes AV unit function. All AV functions are enabled with the AV unit is installed. Not all models have the AV unit installed. Denotes Digital Tuner function. All DTV and AV functions are enabled when the DTV unit is installed. Not all models will have the digital tuner installed. English-17