NEC MD21GS-2MP-BK-BB2 MultiSync MD Series Brochure - Page 3
The NEC MultiSync MD Series features an
UPC - 805736016437
View all NEC MD21GS-2MP-BK-BB2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
3061 shades of gray. 1024 shades of gray out of a palette of 3061 can be depicted when used with a 10-bit video card. 1 Onboard selectable look-up tables (LUTs). The LUT for adjustment is built into the monitor, making 2 it independent of the video card. The monitor's gamma is factory set to the DICOM GSDF standard, but custom gamma settings can be selected using the built-in LUTs. 4 3 A typical NEC MultiSync MD SA Superfine TFT displays with Series display system configuration anti-glare and low reflection. The 1 Single or dual head displays 2 Display controller board 3 GammaComp MD quality control software 4 Calibrator (optional) innovative SA Superfine TFT glass with 2- or 3-Megapixel resolution delivers a brilliant picture with a wide viewing angle of up to 176° and minimal off-angle color shift. Therefore, it provides the best conditions for several doctors doing consultation in front of the display. Mutiple video card support. NEC MultiSync MD Series monitors work with 10-bit or 8-bit cards, however, 10-bit is recommended for optimum performance. 10-bit provides 1024 out of 3061 shades, while 8-bit provides only 256 out of 3061. Internal power supply. The NEC MultiSync MD Series features an internal power supply. There is no brick to kick, therefore, clutter from a clunky power supply is eliminated. lengthens the life of the screen by fending off scratches caused by surface contact. The 98.5% transparent shield features antireflective coating on both sides, anti-fingerprint coating on the outside layer, a hard coat for ruggedness and excellent permanent marker resistance. SentryDX remote network sen- sor. For non-assisted confor- mance, calibration and report- ing functions, an optional, retractable remote sensor (Fig. 4) is available for NEC Multi- Sync MD Series displays. This component, which also can be used with non-MD Series moni- tors, is capable of measuring monitor brightness, whitepoint Figure 4. SentryDX attachable remote network sensor and ambient lighting, while performing a quality check for DICOM confor- mance and contrast response. GammaComp MD colorimeter. Featuring perfectly matched coding for NEC MultiSync MD Series displays, this allows for improved accuracy and communication to the display and provides an ideal solution for radiology technicians. Working in conjunction with X-Light, the sensor (Fig. 5) also supports standalone calibration and exact monitor matching, while enhancing calibration and whitepoint matching for better DICOM GSDF conformance. Figure 5. GammaComp MD colorimeter Optional accessories. To add further performance and convenience, these accessories are available for the NEC MultiSync MD Series. * Each end-user environment is unique, therefore NEC Display Solutions recommends that the user follows the quality control and calibration Protective shield. As these displays are often used by diagnostic professionals for illustration purposes, it is common for them to encounter frequent contact from fingers, pointers and pens. To help protect against LCD screen damage while maintaining the display's optimal image quality, an optional protective shield (Fig. 3) is available. This lightweight accessory, which is quickly and eas- Figure 3. Attachable protective shield ily attached and removed, When combined with an NEC MultiSync 90 Series display (left), NEC MultiSync MD Series monitors can help provide an ideal PACS configuration for your facility.