NEC N500i User Guide - Page 39
Network (M18), Reset settings (M19), Settings M1, Security, Change PINs, PIN activate, Change - unlock code
View all NEC N500i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
No. Security 1 Change PINs Changes the PIN or PIN2 code (PIN activate setting must be turned on to change the PIN code). 2 PIN activate Turns on/off the PIN code entry required at starting up the phone. 3 Change Changes the security code which is used to set some of functions and unlock the Personal Information Manager (PIM) security code features. 2 The default setting of the security code is "0000". 4 Phone lock Turns on/off the Phone lock function which will lock the phone: you can only make emergency calls or enter the security code. After entering the correct security code, you can use the phone normally. 2 Upon power-up, you are prompted to enter the security code if the Phone lock was active when the phone was powered down. 5 Bar calls You can bar the following calls made/received on your phone: all outgoing (dialled) calls, international outgoing (dialled) calls, international outgoing (dialled) calls except to home, all incoming (received) calls or Incoming (received) calls when roaming. , Bar calls facilities are network services and may require a password. 1 Change settings ☛ Highlight the type of restriction and the call type, and then ➔ to save changes. ☛ Key in your bar calls password to verify user identification to the network ➔ SK1 to confirm and save changes to the network. 2 The selected settings have red bars over their icons. 2 Set password Changes the bar calls password. 6 Fixed dialling Turns on/off the fixed dialling which restricts the use of dialled number to only the Fixed Dialling Numbers (FDN). , The FDN facility is network dependent. / See also: "Fixed dialling numbers (FDN)" on page 49. Network (M18) ☛ 1 8 / For settings provided on the Network screen, see "Roaming" on page 14. Reset settings (M19) ☛ 1 9 This function will reset your phone to its factory settings. Settings (M1) 25