NEC NC3200S NC3200S : user's manual - Page 11
Dedicated interface cable, Conversion lens stage connector terminal
View all NEC NC3200S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
1. What's in the Box? and the Names of the Projector Parts 9. Air inlet (for cooling the lamp) The air inlet for cooling the lamp. Do not cover. An air filter is attached over the air inlet to prevent dust. Refer to "5-3. Replacing the Air Filter" (page 44) on how to replace the air filter. 10. Air inlet (for cooling the projector electric circuits) The air inlet for cooling the projector electric circuits. Do not cover. An air filter is attached over the air inlet to prevent dust. Refer to "5-3. Replacing the Air Filter" (page 44) on how to replace the air filter. 11. Lens (optional) Images are projected from the lens. Request your dealer/distributor to install or replace the lens. 12. Interlock connector (Inside front of projector) This is the connector for the projector safety device. This is used to control the projector from an external source. Consult with your dealer/distributor about using this. 13. Conversion lens stay fittings Fittings to attach the fixing stay when using the optional conversion lens (anamorphic lens or wide converter lens). Contact your dealer/distributor for more information on the conversion lens and fixing stay. 14. Dedicated interface cable This is the interface cable that connects with the lamp power supply. 15. AC power cable (For projector) This is the cable that supplies AC power to the projector head. The AC power cable is not an accessory. Consult with your dealer/distributor about the AC power cable. 16.Conversion lens stage connector terminal The terminal to connect the control connector of the conversion lens table when using the optional conversion lens (anamorphic lens or wide converter lens). Contact your dealer/distributor for an installation of the conversion lens. NOTE Do not touch the air outlet and backside of the main unit when your projector is operating. Otherwise, the high temperature may cause burns. 11