NEC NP-PA621X-13ZL User's Manual - Page 144

5. Using On-Screen Menu WPS When the wireless LAN access point connected to the projector supports WPS (Wi-Fi Protected Setup TM), you can use PIN method or push button method to set up the wireless LAN for the projector. PIN TYPE Set a 4-digit or 8 digit-PIN code of WPS for your access point to complete setting for the SSID security. PUSH BUTTON TYPE Press the dedicated button of the access point and the projector's wireless LAN unit to complete setting for the SSID security. NETWORK INFORMATION The following information will be displayed when the projector is connected to a network (wired LAN or wireless LAN). PROJECTOR NAME HOST NAME DOMAIN NETWORK INFOR- CONNECTION STATUS, IP ADDRESS, SUBNET MASK, GATEWAY, WINS, DNS, MAC MATION (WIRED ADDRESS, SSID, NETWORK TYPE, WEP/WPA, CHANNEL, SIGNAL LEVEL, AU- LAN/WIRELESS LAN) THENTICATION, AUTHENTICATION PERIOD DISPLAY THE INFOR- Turn on or off the display of the network information. MATION IN APPLICATION MENU The meanings of these status statements are described below. Statement Authenticated Failure Authenticating... Expired Time Error Authentication status Authentication is done correctly. Authentication failed. Authentication is in process. The digital certificate is expired. Or [DATE, TIME PRESET] is not set correctly. The [DATE, TIME PRESET] has been cleared. Set the correct date and time. 132