NEC NP-PX1004UL-BK Installation Guide - Page 12

PX803UL/PX1004UL Installation Guide Desktop and Ceiling Mount NEC Display Solutions of America, Inc. Rev 1.0 PC Control Codes Function POWER ON POWER OFF INPUT SELECT COMPUTER INPUT SELECT BNC INPUT SELECT BNC(CV) INPUT SELECT BNC(Y/V) INPUT SELECT HDMI INPUT SELECT DisplayPort INPUT SELECT HDBaseT INPUT SELECT SLOT PICTURE MUTE ON PICTURE MUTE OFF Code Data 02H 00H 00H 00H 00H 02H 02H 01H 00H 00H 00H 03H 02H 03H 00H 00H 02H 01H 01H 09H 02H 03H 00H 00H 02H 01H 02H 0AH 02H 03H 00H 00H 02H 01H 06H 0EH 02H 03H 00H 00H 02H 01H 0BH 13H 02H 03H 00H 00H 02H 01H A1H A9H 02H 03H 00H 00H 02H 01H A6H AEH 02H 03H 00H 00H 02H 01H 20H 28H 02H 03H 00H 00H 02H 01H ABH B3H 02H 10H 00H 00H 00H 12H 02H 11H 00H 00H 00H 13H Cable Connection Communication Protocol: Baud Rate: 38400 bps (for cable lengths longer than 20', it is recommended changing to 9600 bps in setup menu) Data Length: 8 bits Parity: No Parity Stop Bit: One bit X on/off: None Communications: Full duplex PC Control Connector (D-Sub 9P) Note 1 : Pins 1, 4, 6, and 9 are used inside the projector. Note 2: For long cable runs it is recommended to set communication speed within the projector to 9600 bps. Note 3: Jumper "Request to Send" and "Clear to Send" together on both ends of the cable to simplify cable connection. www.necdisplay.com PX803UL/PX1004UL Page 12 of 12