NEC NP-U310W U310W : install guide - Page 8

U310W Installation Guide Desktop and Ceiling Mount Input Panel NEC Display Solutions of America, Inc. v1.0 Control Codes Function POWER ON POWER OFF INPUT SELECT COMPUTER 1 INPUT SELECT COMPUTER 2 INPUT SELECT HDMI INPUT SELECT VIDEO INPUT SELECT S-VIDEO PICTURE MUTE ON PICTURE MUTE OFF SOUND MUTE ON SOUND MUTE OFF ON SCREEN MUTE ON ON SCREEN MUTE OFF Code Data 02H 00H 00H 00H 00H 02H 02H 01H 00H 00H 00H 03H 02H 03H 00H 00H 02H 01H 01H 09H 02H 03H 00H 00H 02H 01H 02H 0AH 02H 03H 00H 00H 02H 01H 1AH 22H 02H 03H 00H 00H 02H 01H 06H 0EH 02H 03H 00H 00H 02H 01H 0BH 13H 02H 10H 00H 00H 00H 12H 02H 11H 00H 00H 00H 13H 02H 12H 00H 00H 00H 14H 02H 13H 00H 00H 00H 15H 02H 14H 00H 00H 00H 16H 02H 15H 00H 00H 00H 17H Note: Contact your NEC rep for codes not listed. Cable Connection Communication Protocol: Baud Rate: 38400 bps Data Length: 8 bits Parity: No Parity Stop Bit: One bit X on/off: None Communications: Full duplex To TxD of PC To RxD of PC To GND of PC 12 3 45 67 8 9 To RTS of PC To CTS of PC NOTE 1: It is recommended to set the projector to "Idle Mode" in the Setup menu for best Power ON response. NOTE 2: Pins 2, 3, 5, 6 and 8 are used inside the projector. NOTE 3: For long cable runs it is recommended to set communication speed in the Setup menu to 9600 bps. www.necdisplay.com U310W Page 8 of 8