NEC NP2000 NP1000/NP2000 UM - Page 53
The adjustable ranges for 3D Reform are as follows - resolution
UPC - 050927251979
View all NEC NP2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
The adjustable ranges for 3D Reform are as follows: 4. Convenient Features Cornerstone Keystone Horizontal Max. +/- 35° approx. Max. +/- 27° approx. Vertical Max. +/- 40° approx. * The following are conditions under which the maximum angle is achived: • When the standard lens is used • When the lens shift is set to the center • When the lens shift is used and yet the image is not displayed in the center of the screen, the adjustable range will be increased or decreased. • Image is projected in Wide (Zoom lever) • Resolution is XGA Higher resolution than XGA narrows the adjustable range. • Menu items should be set as follows: Aspect Ratio 4:3 Screen Type 4:3 • Horizontal and Vertical are adjusted separately. A combination of both adjustments narrows the adjustable range. NOTE: • If the Cornerstone screen is unavailable (grayed), press and hold the 3D REFORM button for a minimum of 2 seconds to reset the current correction data. The Cornerstone function becomes available. • Turning on the projector will reset the previous correction setting values and correct distortion anew if the projection angle is changed from the last use. If the projection angle is the same as in the last use, the previous correction setting values are retained in the memory. NOTE: Using 3D Reform correction can cause the image to be slightly blurred because the correction is made electronically. 43